[1] Kaisare, N. S., and Vlachos, D. G., "A Review on Micro-combustion: Fundamentals, Devices and Applications", Progress in Energy and Combustion Science, Vol. 38, No. 3, pp. 321–359, (2012).
[2] Li, J., Chou, S.K., Li, Z.W., and Yang, W.M., "Development of 1D Model for the Analysis of Heat Transport in Cylindrical Micro Combustors", Applied Thermal Engineering, Vol. 29, No. 8, pp. 1854-1863, (2009).
[3] Fanaee, A., and Esfahani, J. A., "The Investigation of Semi-three-dimensional Heat Transfer Modeling in Micro-combustors", Journal of Thermal Science and Engineering Applications, Vol. 3, pp. 1-8, (2011).
[4] Fanaee, S. A., and Esfahani, J. A., "Two-dimensional Analytical Model of Flame Characteristic in Catalytic Micro-combustors for a Hydrogen-air Mixture",
International Journal of Hydrogen Energy, Vol. 39, pp. 4600-4610, (2014).
[5] Fanaee, S. A., and Esfahani, J. A., "Analytical Two-dimensional Modeling of Hydrogen-Air Mixture in Catalytic Micro-combustor", Mechanica, Vol. 50, pp. 1717-1732, (2015).
[6] Fanaee, S.A., "The Analytical Modeling of Finite-length Homogonous Micro-combustor for a Hydrogen-Oxygen Mixture with Wall Temperature Effects", Journal of Mechanics, Vol. 32, No. 5, pp. 631–642, (2016).
[7] Qazizade, A., Renksizbulut, M., and Friedman, J., "Contribution of Homogeneous Reactions to Hydrogen Oxidation in Catalytic Microchannels", Combustion and Flame, Vol. 159, pp. 784-792, (2012).
[8] Yan, Y., Pan, W., Zhang, L., Tang, W., Chen, Y., and Li, L., "Numerical Study of the Geometrical Parameters on CH4/air Premixed Combustion in Heat Recirculation Micro-Combustor", Fuel, Vol. 159, pp. 45-51, (2015).
[9] Hettiarachchi, H.D., Golubovic, M., Worek, W.M., and Minkowycz, W. J., "Three-dimensional Laminar Slip-flow and Heat Transfer in a Rectangular Microchannel with Constant Wall Temperature",
International Journal of Heat and Mass Transfer, Vol. 51, No. 51, pp. 5088-5096, (2008).
[10] Cetin, B., Yuncu, H., and Kackac, S., "Gaseous Flow in Microconduits with Viscous Dissipation",
International Journal of Transport Phenomena, Vol. 8, No. 4, pp. 297-315, (2006).
[11] Shojaeian, M., and Dibaji, A. R., "Three-dimensional Numerical Simulation of the Slip Flow through Triangular Microchannels", International Communications in Heat and Mass Transfer, Vol. 37, pp. 324-329, (2010).
[12] Colin, S., "Gas Microflows in the Slip Flow Regime: A Critical Review on Convective Heat Transfer", Journal of Heat Transfer, Vol. 134, No. 2, pp. 1-13, (2012).
[13] Hayes, R.E., and Kolaczkowski, S.T., "Introduction to Catalysis Combustion", Gordan and Breach, New York, (1997).
[14] Appel, C., Mantzaras, J., Schaeren, R., Bombach, R., and Inauen, A., "Catalytic Combustion of Hydrogen–air Mixtures over Platinum: Validation of Hetero/Homogeneous Chemical Reaction Schemes", Clean Air, Vol. 5, No. 1, pp. 21–44, (2004).
[15] Wang, Y., Zhou, Z., Yang, W., Zhou, J., Liu, J., Wang, Z., and Cen, K., "Combustion of Hydrogen-air in Micro Combustors with Catalytic Pt Layer", Energy Conversion and Management, Vol. 51, pp. 1127-1133, (2010).
[16] Esfahani, J.A., and Fanaee, S.A., "Analytical Modeling of Hydrogen–air Mixture in a Catalytic Micro-channel", Journal of Thermophysics and Heat Transfer, Vol. 22, pp. 274-280, (2015).
[17] Fanaee, S. A., and Esfahani, J. A., "The Analytical Modeling of Propane-oxygen Mixture at Catalytic Micro-channel", Heat and Mass Transfer, Vol. 50, pp. 1365-1373, (2014).