@article { author = {Goudarzi, Koorosh and Ashoori, Amir and Yaghoubi, Mahmood}, title = {Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {6-23}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2020.86291.1406}, abstract = {In this article an adsorption refrigeration system with Activated Carbon/Methanol as adsorption working pair placed in a parabolic trough solar collector have been studied. A one dimensional numerical model based on heat and mass transfer equation and adsorption thermodynamic within the porous medium is developed. Equations has been discretized through fully implicit finite difference method in cylindrical coordinate. Discretized equations is written in FORTRAN program. The simulated code has been validated by comparison via experimental work and former numerical results. The code at each point computes bed temperature, pressure and adsorbed mass of refrigerant inside the adsorbent bed. In additional effect of some parameters such as bed diameter, solar irradiance, cooling source temperature, evaporator and condenser temperature and pressure has been investigated. Effect of these parameters on the refrigeration adsorption system has shown through variation of the solar coefficient of performance (COPS) and specific cooling power (SCP). Under the operating conditions of evaporation temperature T_ev=0 ℃, condensing temperature T_con=30 ℃ and adsorption temperature T_ads=25 ℃ according to the experimental model, COPS and SCP are found to be 0.12 and 45.6 w1kg-1 respectively.}, keywords = {Physical adsorption,Parabolic Trough Collector,Activated Carbon,solar coefficient of performance,specific cooling power}, title_fa = {مطالعه عددی عملکرد چیلر جذبی خورشیدی با جفت کاری کربن فعال/متانول}, abstract_fa = {هدف این مقاله بررسی عددی عملکرد یک سیستم سرمایشی جذب سطحی فیزیکی خورشیدی است که در آن از کربن فعال/متانول به عنوان جفت کاری جاذب/جذب شونده استفاده می‌شود . مدل ریاضی حاکم بر مسأله بر اساس معادلات بقاء جرم، بقاء انرژی و ترمودینامیک فرایند جذب سطحی درون واسط متخلخل بدست آمده است. معادلات به روش اختلاف محدود کاملاً ضمنی گسسته سازی و توسط برنامه کامپیوتری فورترن شبیه‌سازی شده است. تأثیر قطر بستر، میزان تابش خورشیدی، دمای منبع سرد، دما و فشار اواپراتور و کندانسور بر روی ضریب عملکرد خورشیدی و توان تبرید ویژه‌ی سیستم مورد تحلیل و بررسی قرار گرفت.}, keywords_fa = {جذب سطحی فیزیکی,کلکتور خورشیدی سهموی,کربن فعال,ضریب عملکرد خورشیدی,توان تبرید ویژه}, url = {https://jmep.isme.ir/article_244537.html}, eprint = {https://jmep.isme.ir/article_244537_8c592ee27ee52a7911523067263578bc.pdf} } @article { author = {banihashemi, seyedhadi and Assari, Mohammadreza and javadi, Seyed Mohammad and Vahidifar, Saeed}, title = {Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {24-50}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2020.119538.1666}, abstract = {In the present numerical study, the effect of conical obstacle on heat transfer and pressure drop in turbulent flow inside a tube is investigated. Although the effect of different stationary obstacles on heat transfer and pressure drop has been investigated so far, the use of the rotating obstacle is a new issue. Rotating obstacles create powerful rotating flow and increase flow turbulence and vortices through the effective displacement of the fluid particles affects the heat transfer rate. Therefore, the present research investigates the effect of cone obstacle rotation speeds of 25, 50, 75, 100 on the flow characteristics and thermal performance coefficients of the shell-and-tube heat exchanger in the Reynolds number range 4000 to 24000. The results show that for all Reynolds numbers in rotational speed 50 rpm, the heat transfer coefficient reaches its maximum value, and no significant change is observed, with increasing rotational speed. Heat transfer is about 2.2-2.9 times increased compared to smooth pipe and the thermal coefficient performance is in the range of 0.5-1.8. The maximum thermal performance coefficients, using rotating obstacle in comparison to the obstacle stationary one, is 120%.}, keywords = {Rotating obstacle,heat exchanger,Heat Transfer,Turbulent flow}, title_fa = {مطالعه عددی اثر دوران مانع مخروطی بر انتقال حرارت و جریان سیال در لوله مبدل حرارتی}, abstract_fa = {بررسی روش‌های افزایش انتقال حرارت در مبدل های حرارتی در طول سال‌های گذشته به خاطر اهمیت موضوع در بهینه سازی و کاهش اثرات مخرب زیست محیطی مورد مطالعه قرار گرفته است. لذا در مطالعه حاضر اثر دوران مانع مخروطی بر انتقال حرارت در محدوده عدد رینولدز 4000تا24000 در داخل لوله به عنوان یک موضوع جدید بررسی می‌گردد. با توجه به نتایج، انتقال حرارت در حدود9/3–2/2 برابر در مقایسه با لوله ساده افزایش یافته و عملکرد کلی انتقال حرارت در محدوده 5/1-8/0 است. همچنین بیشترین مقدار افزایش ضریب عملکرد حرارتی در اثر دوران مانع نسبت به مانع ثابت،%120 ثبت گردید.}, keywords_fa = {دوران مانع,مبدل حرارتی,انتقال حرارت,جریان آشفته}, url = {https://jmep.isme.ir/article_46538.html}, eprint = {https://jmep.isme.ir/article_46538_844c9608c9f0742af66f1ae173c3b565.pdf} } @article { author = {Mokhtari, M. Abolfazl}, title = {Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {51-71}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.123627.1690}, abstract = {In the current paper thermal buckling of cylindrical shells reinforced with GPL graphene sheets subjected to uniform temperature rise is investigated. Nanocomposite shell reinforced by graphene platelets (GPLs). It is assumed that the GPLs are randomly oriented and uniformly distributed along in each layer. Variation of volume fraction from each layer to other is based on the several functionally graded types. The effective material properties are obtained using the Halpin-Tsai rule. The equilibrium equations are obtained considering the first order shear deformation shell theory, Donnell assumption, and Von-karman type of geometrical nonlinearity. The linear obtained stability equations are discrete utilizing the generalized differential quadrature procedure along the shell domain. Then the eigenvalue problem is solved and critical buckling temperature is calculated. In the section of numerical results, after validation, the effects of geometric parameter, boundary conditions, mass fraction of GPL, and also type of functionally graded on the stability of structure are studied.}, keywords = {Buckling,cylindrical shell,Graphene Nanofibers,Generalized Differential Squares Method}, title_fa = {تحلیل پایداری حرارتی پوسته استوانه‌ای تقویت شده با ورق‌های گرافن GPL با استفاده از روش مربعات تفاضلی}, abstract_fa = {مقاله حاضر به تحلیل کمانش حرارتی پوسته کامپوزیتی استوانه‌ای تقویت شده با ورق‌های گرافن GPLs می‌پردازد. مقدار کسر حجمی گرافن‌ها به صورت تابعی مدرج FG تغییر می‌کند. خواص مؤثر الاستیک پوسته با استفاده از قانون هالپین-سای به دست آمده است. معادلات پوسته با استفاده از تئوری مرتبه اول تغییر شکل برشی، تئوری غیرخطی هندسی ون-کارمن و فرضیات دانل استخراج شده‌اند. معادلات تعادل پس از تحلیل پیش‌کمانش توسط روش مربعات تفاضلی تعمیم‌یافته GDQ جداسازی شده و حل ‌می‌گردد. پس از صحه‌گذاری بر روش حل استفاده شده، نتایج جدید برای نشان دادن اثر پارامترهای مختلف بر دمای کمانش بحرانی نشان داده شده‌است.}, keywords_fa = {کمانش,پوسته استوانه‌ای,نانوورق‌های گرافن,روش مربعات تفاضلی تعمیم‌یافته}, url = {https://jmep.isme.ir/article_242306.html}, eprint = {https://jmep.isme.ir/article_242306_5bfe15eac6de31dcca1dd0e658588259.pdf} } @article { author = {Noori, Amir and mahdi, miralam}, title = {Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {72-87}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.131683.1715}, abstract = {In this study the free convection heat transfer of a nanofluid, including water and nanoparticles suspended in a square cavity is simulated numerically for a laminar flow. Open source framework i.e. OpenFOAM was used to develop the equations and make changes in the desired terms such as relative velocity between the nanoparticles and the base fluid. To achieve the purpose of the research and to ensure the accuracy of the numerical algorithms used in this framework, at first the free convection inside the cavity was investigated using two-phase mixture model and the results of the present study were compared with the results presented in the literature. Then, with the help of existing mathematical equations, important parameters in simulating the forces acting on nanoparticles in the free convection inside the cavity were studied and as a result, the forces that had a significant impact were selected as the most important and corrected relative velocity was entered in the continuity, momentum, heat transfer and continuity equation of the second phase (nanoparticles) as a parameter called JP. This simulation was performed using the PIMPLE algorithm (SIMPLE + PIZO). To consider free convection, nanofluid’s density changes with Boussinesq relationship. The mixture two-phase model has used for modeling with higher speed and more accuracy and also effective thermophysical properties of nanofluid, related to JP parameter have been used in order to increase the accuracy of work. As a result, the effect of these forces on different conditions was investigated.}, keywords = {nanofluid,Slip velocity,free convection,OpenFOAM,Nusselt number}, title_fa = {بررسی عددی نیروهای موثر بر سرعت‌نسبی و انتقال‌حرارت جابجایی ‌آزاد آرام نانوسیال در جعبه‌ابزار اپنفوم}, abstract_fa = {رفتار حرارتی نانوسیال آلومینا-آب تحت تأثیر نیروهای مختلف بر روی سرعت‌نسبی در محفظه مربعی‌شکل دو ‌بعدی توسط حلگر توسعه یافته در کارابزار متن‌باز اپنفوم بررسی شده است. این نیروها که شامل اینرسی، انتشار ‌براونی، ترموفورسیس، دیفیوزوفورسیس، اثر مگنوس، زهکشی‌سیالات و گرانش می‌باشند مورد مطالعه قرار گرفته و مهم‌ترین آن‌ها به صورت پارامتPj وارد معادلات بقای مخلوط گردید. شبیه‌سازی با استفاده از الگوریتم پیمپل (سیمپل+پیزو) و تقریب بوزینسک بر روی جریان‌جابجایی-آزاد و آرام انجام شده است. نتایج مربوط به روش‌های مختلف در نمودارهای عدد ناسلت–عدد رایلی ارائه شد. بررسی این نتایج بیانگر دقت بهتر حلگر ارائه شده در این مقاله است.}, keywords_fa = {نانوسیال,سرعت نسبی,جابجایی آزاد,اپنفوم,عدد ناسلت}, url = {https://jmep.isme.ir/article_241417.html}, eprint = {https://jmep.isme.ir/article_241417_29e59e7c77073084544d001d3cf0d5ca.pdf} } @article { author = {Mokhtari, M. Abolfazl and Rostami, Mohsen}, title = {Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {88-115}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.131775.1717}, abstract = {Rising fuel prices and limited fossil fuels have motivated scientists to find some new methods to recover the heat dissipation from the internal combustion engines exhaust gases in recent decades. Only 30 percent of the fuel energy is converted to the useful work and the rest of it is lost through the exhaust gases of the engine and the engine coolant system. In this paper this issue has been considered and hence two different configurations of organic Rankine cycle with two operating fluids R113 and R123 have been designed and energy and exergy analysis have been applied in order to recovering the heat dissipation from the six cylinder internal combustion engine exhaust gases (in full load operating mode). Next, the performance of these cycles has been optimized by sensitivity analysis to find the optimum working temperature and pressure of these two cycles. the results shows the optimum points of the system which is calculated by the mention technique.}, keywords = {Waste heat recovery,Internal combustion engine,Energy Analysis,Exergy Analysis,Rankin organic cycle}, title_fa = {آنالیز انرژی و اگزرژی دو پیکربندی‌ چرخه رانکین آلی در بازیابی گرمای اتلافی موتور احتراق‌داخلی}, abstract_fa = {از تمام انرژی موجود در سوخت، تنها 30% از آن به انرژی مفید تبدیل شده و باقیمانده آن از طریق گازهای خروجی از موتور و مایع خنک‌کننده موتور اتلاف می‌گردد. در این مقاله آنالیز انرژی و اگزرژی دو پیکربندی مختلف از سیکل ارگانیک رنکین با دو سیال عامل R113 و R123 با هدف بازیابی گرمای اتلافی از گازهای خروجی از یک موتور احتراق داخلی شش سیلندر (در حالت عملکردی تمام‌بار) انجام شده و همچنین بهینه‌سازی عملکرد سیکل‌های مذکور با استفاده از روش آنالیز حساسیت به منظور یافتن دما و فشار کاری بهینه دو سیکل صورت گرفته‌است.}, keywords_fa = {بازیابی گرمای اتلافی,موتور احتراق داخلی,تحلیل انرژی,تحلیل اگزرژی,چرخه رانکین آلی}, url = {https://jmep.isme.ir/article_241712.html}, eprint = {https://jmep.isme.ir/article_241712_af91bfa65c7bc7d111cd660017217245.pdf} } @article { author = {Nemati, Mohammad and sefid, mohamad and mohamadzade, hajar}, title = {The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {116-130}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.131970.1719}, abstract = {In this paper, the effect of shape and aspect ratio of wall on natural convection heat transfer of non-Newtonian fluid with power law model within two-dimensional enclosure in the presence of a uniform magnetic field by lattice Boltzmann method (LBM) is investigated. The left wall is at a constant hot temperature, while the right wall is kept on cold constant temperature and other walls are considered adiabatic. In this simulation, the flow field and temperature are calculated by simultaneously solving the flow and temperature distribution functions. The effect of various parameters such as Hartmann number, aspect ratio, different shape of the wall and power index of non-Newtonian fluid is investigated. The results show that increasing power index, aspect ratio and Hartmann number decrease the average Nusselt number. Also, the highest amount of heat transfer is generally associated with the case of a triangular wall. In addition, increasing the power index reduces the effect of the magnetic field.}, keywords = {Lattice Boltzmann Method,Natural convection,Non-Newtonian fluid,Magnetic field,Different wall shape}, title_fa = {اثر شکل و نسبت ابعاد دیواره بر انتقال حرات سیال غیرنیوتنی با مدل توانی در حضور میدان مغناطیسی}, abstract_fa = {در این مطالعه اثر میدان مغناطیسی و شکل و نسبت ابعاد دیواره محفظه بر انتقال حرارت جابجایی طبیعی سیال غیرنیوتنی با مدل توانی به روش شبکه بولتزمن بررسی شده است.دیواره سمت چپ و راست بترتیب در دمای ثابت گرم و سردقرار دارد و سایر دیواره ها آدیاباتیک هستند.تأثیر پارامترهایی چون عدد هارتمن، شاخص توانی سیال غیرنیوتنی، نسبت ابعاد و شکل دیواره محفظه بررسی شده است.نتایج نشان میدهد افزایش شاخص توانی، نسبت ابعاد و عدد هارتمن سبب کاهش عدد ناسلت متوسط میگردد.عموماً بیشترین انتقال حرارت مربوط به حالتی است که دیواره مورب باشد.افزایش شاخص توانی سبب کاهش اثر میدان مغناطیسی میگردد.}, keywords_fa = {روش شبکه بولتزمن,جابجایی طبیعی,سیال غیرنیوتنی,میدان مغناطیسی,شکل مختلف دیواره}, url = {https://jmep.isme.ir/article_241628.html}, eprint = {https://jmep.isme.ir/article_241628_8fe6f4c332403195506f0868ccce63d4.pdf} } @article { author = {Nikian, Mohammad and Shokri, Yaser and Ghazi, Mehrangiz}, title = {Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {131-153}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.135296.1724}, abstract = {In design and analysis of total site of heat and power cogeneration, how to arrange equipment has a unique importance in production process. Due to high cost of turbines setting up and fuel demand for power plants that generates required steam for turbines, suitable design of these arrangements can save or in front of it create unjustified extra costs. In this paper, using an Iterative Bottom-to-Top Model (IBTM) which is a new modified cogeneration targeting method, cogeneration potential is estimated and fit to it, temperatures of steam levels, power generation, fuel and steam flows and the amount of boiler heat load are calculated. First steam turbines arrangement between steam levels for case study is designated and if required power is not provided in total site by steam turbines, use of gas turbine or condensing turbine to generate additional power are checked. The results of the research showed that the selected scenario of back pressure steam turbines arrangement beside gas turbine system, has maximum exergy efficiency, minimum exergy destruction and minimum total capital cost rate and exergy destruction cost rate. Finally, mixed use of back pressure steam turbines beside gas turbine system, were suggested as the best arrangement from an exergoeconomic approach.}, keywords = {Exergoeconomic Analysis,Exergy,Total site,Total site utility,Cogeneration}, title_fa = {مدلسازی و تحلیل سایت جامع تولید همزمان حرارت و توان از دیدگاه اگزرژواکونومیک در یک مورد مطالعاتی چهار مگاواتی}, abstract_fa = {در طراحی و تحلیل سایت جامع تولید همزمان حرارت و توان، نحوه‌ی چیدمان تجهیزات در فرآیند تولید اهمیت ویژه‌ای دارند. در ابتدا چیدمان توربین‌های بخار بین سطوح بخار برای مورد مطالعاتی تعیین شده و درصورت تامین نشدن توان مورد نیاز درسایت جامع توسط توربین‌های بخار استفاده از توربین گازی یا توربین کندانس برای تولید توان اضافی بررسی می‌گردد. درنهایت، استفاده ترکیبی از چیدمان توربین‌های بخار فشار برگشتی درکنار سامانه توربین گازی، از دیدگاه اگزرژواکونومیک به عنوان بهترین چیدمان پیشنهاد شدند.}, keywords_fa = {تحلیل اگزرژواکونومیک,اگزرژی,سایت جامع,یوتیلیتی سایت جامع,تولید همزمان}, url = {https://jmep.isme.ir/article_241607.html}, eprint = {https://jmep.isme.ir/article_241607_bfbb15f44515a10e23b6457d6b1ef8db.pdf} } @article { author = {Farshidian far, Alireza and bashirnezhad, kazem and Bashishahabi, Peyman and Jahanpor, Javad}, title = {Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance.}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {154-171}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.138881.1738}, abstract = {Plate heat exchangers are one of the new ways of exchanging heat energy between two or more fluids at different temperatures.In this paper the hydraulic and thermal performance of a new design of a plate heat exchanger using simulation and laboratory methods is investigated. In the proposed plate heat exchanger design, first the special geometry including the proposed curved Chevron pattern for the heat transfer zone in the plates is introduced.The results of this proposed plate heat exchanger are evaluated by laboratory method with M6B plate heat exchanger. The simulation and laboratory results show that while maintaining the heat efficiency of the converter, the pressure drop is significantly reduced. This significant reduction in pressure drop of the proposed model leads to a reduction in the number of plates and savings in raw material consumption, reducing the capacity and energy consumed by the pump for fluid transfer, production time and installation space.}, keywords = {plate heat exchanger,Chevron pattern,Heat transfer zone,Heat transfer coefficient,Pressure drop}, title_fa = {بررسی آزمایشگاهی و شبیه سازی اثر تغییرات هندسی صفحات مبدل حرارتی صفحه ای در بهبود عملکرد آن}, abstract_fa = {در این مقاله، عملکرد هیدرولیکی و حرارتی طرح جدیدی از مبدل حرارتی صفحه‌ای با استفاده ازروشهای شبیه سازی و آزمایشگاهی بررسی شده است.نتایج مبدل پیشنهادی با مبدل حرارتی M6B به روش آزمایشگاهی مورد بررسی قرار می گیرد. نتایج شبیه سازی وآزمایشگاهی مبین آن است که هندسه مبدل پیشنهادی، ضمن حفظ راندمان حرارتی مبدل، افت فشار بطور قابل ملاحظه‌ای کاهش میابد. کاهش قابل توجه افت فشار مدل پیشنهادی،منجر به کاهش تعداد صفحات و صرفه جویی در مصرف مواد خام، کاهش ظرفیت و انرژی مصرف شده پمپ موردنیاز جهت انتقال سیال، کاهش هزینه، زما ن تولید و فضای نصب مبدل میشود.}, keywords_fa = {مبدل حرارتی صفحه ای,الگوی شورون,ناحیه انتقال حرار ت,ضریب انتقال حرارت,افت فشار}, url = {https://jmep.isme.ir/article_244070.html}, eprint = {https://jmep.isme.ir/article_244070_5eff1962b140f83942e1528eba69bfa1.pdf} } @article { author = {Emamifar, Armin}, title = {Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {172-204}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.525928.1771}, abstract = {In this paper, improving the performance of a compression-absorption refrigeration system employing a booster compressor is investigated based on energy, exergy and economic analysis. Two position for the booster compressor are proposed (between the generator and the condenser, or between the cascade condenser and the absorber). the results show that using a compressor between the generator and the condenser improves the COP and the second law efficiency by 68% and 24% respectively and enhances the capital cost of the cycle by 31%, while using the compressor between the evaporator and the absorber can increase the COP and the second law efficiency of the cycle by 79% and 31%, respectively and decrease the cost of the cycle by 40%. Furthermore, the effect of compressor pressure ratio,condensor temperature, generator temperature, cascade condenser temperature and compression section evaporator temperature on thermodynamic and economic performance of the cycle is analyzed. The results indicate that the two hybrid systems can improve the performance of the cycle and locating the compressor between the evaporator and the absorber can show better performances.}, keywords = {cascaded compression-absorption refrigeration,energy,Exergy,Economic Analysis,Compressor}, title_fa = {تحلیل انرژی، اگزرژی و اقتصادی یک سیکل بهبود یافته تبرید هیبریدی آبشاری جذبی-تراکمی}, abstract_fa = {در این مقاله، استفاده از یک کمپرسور کمکی، به منظور بهبود عملکرد یک سیکل تبرید آبشاری جذبی-تراکمی از منظر ترمودینامیکی و اقتصادی مورد بررسی قرار گرفته است. نتایج نشان می دهد که استفاده از کمپرسور کمکی بین ژنراتور و کندانسور، ضریب عملکرد و راندمان قانون دوم سیکل را به ترتیب 68 % و 24 % افزایش داده و هزینه های کلی سیستم را 31 % کاهش می دهد. در مقابل، قرارگیری کمپرسور بین اواپراتور و جاذب موجب افزایش 79 درصدی ضریب عملکرد، افزایش 31 درصدی راندمان قانون دوم و کاهش 40 درصدی هزینه های سیکل می گردد.}, keywords_fa = {تبرید آبشاری جذبی تراکمی,انرژی,اگزرژی,تحلیل اقتصادی,کمپرسور}, url = {https://jmep.isme.ir/article_244445.html}, eprint = {https://jmep.isme.ir/article_244445_60475a027b259b9367e2d9486097ec03.pdf} } @article { author = {Mohammadi Karachi, Arash and Adibi, Pouyan}, title = {Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {22}, number = {4}, pages = {205-240}, year = {2021}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {10.30506/ijmep.2021.130899.1709}, abstract = { In the present study, the simulation of natural convection heat transfer in porous media has been done at the Representative Elementary Volume scale by using lattice Boltzmann method with the help of the Brinkman- Forchimehr general model. The simulation of natural convection heat transfer in the porous media is evaluated for square cavity with inner circular cylinder and the effect of variation of different parameters on the desired results was evaluated for different Ra numbers  (Ra=103, 104, 105, 106) ) and in a wide range of Darcy numbers (Da=10-1, 10-3, 10-5), porosity coefficients (ϵ=0.3,0.6,0.9) and various ratio of radius to length (R/L=0.1, 0.2, 0.3). This simulation showed that average in the constant Rayleigh, Darcy, and aspect ratio , and also increase in the amount of porosity from 0.3 to 0.6 the average Nusselt number increases from 4.33 to 5.40. It means that heat transfer and subsequently average Nusselt number are increased by an increase in the contact surface (porosity)..   }, keywords = {Lattice Boltzmann Method,Natural convection heat transfer,Porous media,Representative Elementary Volume scale,Brinkman-Forchimehr general model}, title_fa = {بررسی عددی پارامترهای موثر بر انتقال حرارت جابجایی طبیعی در حفره مربعی متخلخل با مانع استوانه‌ای داخلی با استفاده از روش شبکه بولتزمن}, abstract_fa = {در این مقاله انتقال حرارت جابجایی طبیعی درون محیط متخلخل در مقیاس REV، با استفاده از روش شبکه بولتزمن و به کمک مدل عمومی اصلاح شده برینکمن- فورچیمر با صرف نظر کردن از ترم‌های تلفات ویسکوز و کار ناشی از تراکم شبیه‌سازی شده ‌است. تاثیر نسبت شعاع به طول (1/0، 2/0 و 3/0)، رایلی (103، 104، 105 و 106)، دارسی (1-10، 3-10 و 5-10) و ضریب تخلخل (3/0، 6/0 و 9/0) بر مسئله انتقال حرارت جابجایی در حفره متخلخل با سیلندر داخلی نیز بررسی شده است. در اعداد رایلی، دارسی و نسبت ابعاد ثابت با افزایش ضریب تخلخل از 3/0به 6/0 عدد ناسلت میانگین از 33/4 به 40/5 افزایش می‌یابد. به این معنی که با افزایش سطح تماس (ضریب تخلخل) انتقال حرارت بهبود و متعاقبا عدد ناسلت میانگین افزایش می‌یابد.}, keywords_fa = {روش شبکه بولتزمن,انتقال حرارت جابجایی طبیعی,محیط متخلخل,مقیاس حجم معیار اولیه,مدل عمومی برینکمن- فورچیمر}, url = {https://jmep.isme.ir/article_245127.html}, eprint = {https://jmep.isme.ir/article_245127_c4f8d112b2563a0b10d1e6caabc4d32e.pdf} }