@article { author = {Sharifi, Saeed and Shakeri, Mahmood and Ebrahimi Fakhari, Hadi and Masoomi Asiabi, Reza}, title = {Crushing response study of mechanical bitubal parallel energy absorbers}, journal = {Iranian Journal of Mechanical Engineering Transactions of ISME}, volume = {15}, number = {3}, pages = {37-51}, year = {2013}, publisher = {ISME}, issn = {2538-4775}, eissn = {}, doi = {}, abstract = {Nowadays, increased interest in vehicle safety and crashworthiness has led to comprehensive research on the crush response of energy absorbers from analytical, numerical and experimental points of view. Numerous established works have been published in studying the crushing response of tubes. In this way, this paper deals with numerical and experimental study on a new kind of energy absorber, named “bitubal parallel energy absorber”. In this absorber two tubes with different diameters are subjected to quasi-static axial loading. In addition to energy needed to crushing the inner tube and the outer tube, the interaction between two tubes is an affecting factor in energy absorbing. First, FE simulations were performed using ABAQUS/Explicit to explore an appropriate dimension for tubes, then effect of tube diameters and interaction effect in energy absorption capacity and collapse mode of parallel tubes studied. At the end bitubal energy absorber and equivalent monotubal were compared and it was observed that maximum crushing load and fluctuations in load-displacement curve are lower in bitubal specimen. FE simulation techniques validated by experimental testing on circular AL-6063-O extrusions and showed that ABAQUS can predict crushing response of parallel tubes high accuracy.}, keywords = {Energy absorber,Parallel Shock absorber,Axial collapse,finite element method}, title_fa = {مطالعه ی رفتار ضربه گیرهای مکانیکی دولوله ای- موازی}, abstract_fa = {در این مقاله به بررسی تجربی و عددی نوع جدیدی از ضربه­گیرهای مکانیکی، با عنوان ضربه­گیرهای دولوله­ای موازی پرداخته می­شود که در آن دو لوله با قطرهای متفاوت از جنس AL-6063-O، به صورت هم­محور، تحت بار شبه­استاتیک محوری قرار می­گیرند. ابتدا به روش المان محدود و با استفاده از نرم افزار ABAQUS ترکیب مناسبی از لوله­ها انتخاب شده و سپس تاثیر اختلاف قطر آن­ها مطالعه می­شود. مقایسه­ای میان پارامترهای ضربه­پذیری در مدل دولوله­ای با هر یک از لوله­های داخلی و خارجی و نیز مجموع آن­ها انجام شده و اثر برهم­کنش میان لوله­ها مطالعه می­شود. در انتها پارامترهای ضربه­پذیری در ضربه­گیر دولوله­ای با نمونه­ی تک­لوله­ای معادل مقایسه می­شود. نتایج حاصل از مدل المان محدود نشان می­دهد نرم افزار ABAQUS به خوبی می­تواند فروریزش ضربه­گیرهای موازی را پیش­بینی کند.}, keywords_fa = {جاذب انرژی,ضربه گیر موازی,فروریزش محوری,مدل المان محدود}, url = {https://jmep.isme.ir/article_27839.html}, eprint = {https://jmep.isme.ir/article_27839_5252e8989ffc44803c6da030feae7099.pdf} }