ORIGINAL_ARTICLE
بررسی اثر فرآیند پرس در قالب شیار محدود (CGP) بر روی ورق های مسی
در این تحقیق فرآیند پرس در قالب شیار محدود مطالعه شده و تاثیر این فرآیند بر خواص مکانیکی و ریزساختار ورقهای مسی مورد بررسی قرار گرفته است. جهت بررسی خواص مکانیکی از آزمونهای تست کشش تک محوره و سختی ویکرز و برای ارزیابی ریزساختارها از میکروسکوپ نوری استفاده شده است. بررسی نتایج نشان داد با استفاده از فرآیند پرس در قالب شیار محدود، استحکام و سختی نمونهها به طور چشمگیری افزایش مییابد. همچنین تصاویر تهیه شده با استفاده از میکروسکوپ نوری نشان داد فرآیند پرس در قالب شیار محدود بر ریزدانه نمودن ساختار بسیار موثر میباشد.
https://jmep.isme.ir/article_24900_23d7b4a975e8adfdcc18e021af72f761.pdf
2017-05-22
6
18
تغییر شکل پلاستیک شدید
پرس در قالب شیار محدود
خواص مکانیکی
ریزساختار
محمد
هنرپیشه
honarpishe@kashanu.ac.ir
1
کاشان*مهندسی مکانیک
LEAD_AUTHOR
فرشاد
نظری
f_nazari@grad.kashanu.ac.ir
2
دانشگاه کاشان
AUTHOR
وحید
ابراهیم پور
vahidebrahimpor@yahoo.com
3
دانشگاه آزاد اسلامی واحد جاسب
AUTHOR
[1] Honarpisheh, M., Haghighat, E., and Kotobi, M., "Investigation of Residual Stress and Mechanical Properties of Equal Channel Angular Rolled St12 Strips", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, https://doi.org/10.1177/1464420716652436, (2016).
1
[2] Kotobi, M., and Honarpisheh, M., "Uncertainty Analysis of Residual Stresses Measured by Slitting Method in Equal-channel Angular Rolled Al-1060 Strips", The Journal of Strain Analysis for Engineering Design, Vol. 52, No. 2, pp. 83-92, (2017).
2
[3] Lee, J.W., and Park, J.J., “Numerical and Experimental Investigations of Constrained Groove Pressing and Rolling for Grain Refinement”, Journal of Materials Processing Technology, Vol. 130–131, pp. 208–213, (2002).
3
[4] Krishnaiah, A., Chakkingal, U., and Venugopal, P., “Production of Ultrafine Grain Sizes in Aluminium Sheets by Severe Plastic Deformation using the Technique of Groove Pressing”, Scripta Materialia, Vol. 52, pp. 1229–1233, (2005)
4
[5] Krishnaiah, A., Chakkingal, U., and Venugopal, P., “Applicability of the Groove Pressing Technique for Grain Refinement in Commercial Purity Copper”, Materials Science and Engineering A, Vol. 410–411, pp. 337–340, (2005).
5
[6] Peng, K., Su, L, Shaw, L.L., and Qian, K.W., “Grain Refinement an Crack Preventation in Constrained Groove Pressing of Two Phase Cu-Zn Alloys”, Scripta Materialia, Vol. 57, pp. 987-990, (2007).
6
[7] Peng, K., Zhanga, Y. L., Shaw, L., and Qian, K.W., “Microstructure Dependence of a Cu–38Zn Alloy on Processing Conditions of Constrained Groove Pressing”, Acta Materialia, Vol. 57, pp. 5543–5553, (2009).
7
[8] Yoon, S.C., Krishnaiah, A., Chakkingal, U., and Kim, H.S., “Severe Plastic Deformation and Strain Localization in Groove Pressing”, Computational Materials Science, Vol. 43, pp. 641-645, (2008).
8
[9] Shirdel, A., Khajeh, A., and Moshksar, M.M., “Experimental and Finite Element Investigation of Semi-constrained Groove Ressing Process”, Materials and Design, Vol. 31, pp. 946-950, (2010).
9
[10] Khodabakhshi, F., Kazeminezhad, M., and Kokabi, A.H., “Constrained Groove Pressing of Low Carbon Steel: Nano-structure and Mechanical Properties”, Materials Science and Engineering A, Vol. 527, pp. 4043–4049, (2010).
10
[11] Xiaolei, Dong, B. Y., and Zhihao, M., “Grain Refinement in Constrained Groove Pressing of 7050 Aluminum Alloy”, Advanced Materials Research, Vol. 189-193, pp. 2823-2826, (2011).
11
[12] Mou, X., Peng, K., Zeng, J., Shaw, L., and Qian, K.W., “The Influence of the Equivalent Strain on the Microstructure and Hardness of H62 Brass Subjected to Multi-cycle Constrained Groove Pressing”, Journal of Materials Processing Technology, Vol. 211, pp. 590–596, (2011).
12
[13] Borhani, M., and Djavanroodi, F., “Rubber Pad-constrained Groove Pressing Process: Experimental and Finite Element Investigation”, Materials Science and Engineering A, Vol. 546, pp. 1–7, (2012).
13
[14] Khakbaz, F., and Kazeminezhad, M., “Work Hardening and Mechanical Properties of Severely Deformed AA3003 by Constrained Groove Pressing”, Journal of Manufacturing Processes, Vol. 14, pp. 20–25, (2012).
14
[15] Khakbaz, F., and Kazeminezhad, M., “Strain Rate Sensitivity and Fracture Behavior of Severely Deformed Al–Mn Alloy Sheets”, Materials Science and Engineering A, Vol. 532, pp. 26– 30, (2012).
15
[16] Ratna Sunil, B., Arun Anil Kumar, Sampath Kumar, T.S., and Uday Chakkingal, “Role of Biomineralization on the Degradation of Fine Grained AZ31 Magnesium Alloy Processed by Groove Pressing”, Materials Science and Engineering C, Vol. 33, pp. 1607–1615, (2013).
16
[17] Khodabakhshi, F., Abbaszadeh, M., Eskandari, H., and Mohebpour, S.R., “Application of CGP-cross Route Process for Microstructure Refinementand Mechanical Properties Improvement in Steel Sheets”, Journal of Manufacturing Processes, Vol. 15, No. 4, pp. 533-541, (2013).
17
[18] Ebrahimi, M., Attarilar, Sh., Djavanroodi, F., Gode, C., and Kim, H.S., “Wear Properties of Brass Samples Subjected to Constrained Groove Pressing Process”, Materials and Design, Vol. 63, pp. 531–537, (2014).
18
[19] Zongshen, W., Yanjin, G., and Chongkai, Z., “Effects of Friction on Constrained Groove Pressing of Pure Al Sheets”, Advanced Materials Research Vol. 926-930, pp. 81-84, (2014).
19
[20] Zong-Shen, W., Yan-Jin, G., Guang-Chun, W., and Chong-Kai, Z., “Influences of Die Structure on Constrained Groove Pressing of Commercially Pure Ni Sheets”, Journal of Materials Processing Technology, Vol. 215, pp. 205–218, (2015).
20
[21] Kazeminezhad, M., and Hosseini, E., “Optimum Groove Pressing Die Design to Achieve Desirable Severely Plastic Deformed Sheets”, Materials and Design, Vol. 31, pp. 94–103, (2010).
21
[22] Hosseini, E., Kazeminezhad, M., Mani, A., and Rafizadeh, E., “On the Evolution of Flow Stress during Constrained Groove Pressing of Pure Copper Sheet”, Computational Materials Science, Vol. 45, pp. 855–859, (2009).
22
[23] Zhu, Y.T., Lowe, T.C., and Langdon, T.G., “Performance and Applications of Nanostructured Materials Produced by Severe Plastic Deformation”, Scripta Materialia, Vol. 51, pp. 825-830, (2004).
23
[24] Luo-xing, L.I., Guan Wang, Jie, L.I.U., and Zai-qi, Y., “Flow Softening Behavior and Microstructure Evolution of Al−5Zn−2Mg Aluminum Alloy during Dynamic Recovery”, Transactions of Nonferrous Metals Society of China, Vol. 24, pp. 42−48, (2014).
24
Khodabakhshi, F., and Kazeminezhad, M., “The Effect of Constrained Groove Pressing on Grain Size, Dislocation Density and Electrical Resistivity of Low Carbon Steel”, Materials and Design, Vol. 32, pp. 3280–3286, (2011).
25
ORIGINAL_ARTICLE
بررسی میزان انعطافپذیری بازوی زنجیرههای پروتئین شوک حرارتی کوچک به عنوان نانوعملگر
در این مقاله رفتار پروتئین چپرون شوک حرارتی کوچک در برابر تغییر دما براساس شبیهسازی دینامیک مولکولی مورد بررسی قرار گرفته است. تغییرات ساختاری در دمای نرمال و متغیر، برای یک و دو زنجیره از پروتئین مورد بررسی قرار گرفته است. نتایج نشان میدهد میزان انعطاف پذیری بازو به حدی است که کاهش دما در شبیهسازی یک زنجیره سبب بسته شدن بازو و کاهش جابهجایی مرکز جرم میشود. در شبیهسازی دو زنجیره نیز کاهش دما سبب بسته شدن بازوی یکی از زنجیرهها و باز شدن بازوی زنجیره دیگر میشود. این رفتار متضاد در جابهجایی مرکز جرم پروتئین نیز مشاهده میگردد.
https://jmep.isme.ir/article_24896_91815c98edb9512c2ff50c19bc483027.pdf
2017-05-22
19
33
پروتئین چپرون
دما
دینامیک مولکولی
گرومکس
نانوعملگر
علی
غفاری
ghaffari@kntu.ac.ir
1
هیئت علمی دانشگاه صنعتی خواجه نصیر طوسی
AUTHOR
علیرضا
خدایاری
arkhodayari@yahoo.com
2
دانشگاه ازاد اسلامی واحد پردیس*مهندسی مکانیک
LEAD_AUTHOR
شیرین
موثق
shmovasagh@mail.kntu.ac.ir
3
دانشجوی کارشناسی ارشد مهندسی مکاترونیک، دانشگاه صنعتی خواجه نصیر طوسی
AUTHOR
A Report by the Interagency Working Group on Nano Science, "National Nanotechnology Initiative: Leading to the Next Industrial Revolution", pp. 15-19, Engineering and Technology Committee on Technology, National Science and Technology Council, Washington, D.C, (2000).
1
Kharwade, M., Nijhawan, M., and Modani, S., "Nano Robots: A Future Medical Device in Diagnosis and Treatment", Research Journal of Pharmaceutical, Biological and Chemical Sciences, Vol. 4, No. 4, pp. 1299-1307, (2013).
2
Sujatha, V., Suresh, M., and Mahalaxmi, S., "Nanorobotics - a Futuristic Approach", Indian Journal of Dentistry, Vol. 1, No. 1, pp. 86-90, (2010).
3
Drexler, E.K., "Engines of Creation 2.0: The Coming Era of Nanotechnology", 20th Anniversary ed., Oxford University Press, Oxford, (2006).
4
Freitas, R.J., "Nano Medicine, Volume I: Basic Capabilities", Landes Bioscience, Georgetown, Texas, pp. 1-13, (1999).
5
Freitas, R.J., "Nano Medicine, Volume IIA : Biocompatibility", Landes Bioscience", Georetown, Texas, pp. 74-78, (2003).
6
Freitas, R.J., "Exploratory Design in Medical Nanotechnology: A Mechanical Artificial Red Cell", Artificial Cells, Blood Substitutes, and Immobilization Biotechnology, Vol. 26, No. 5, pp. 411-430, (1998).
7
Freitas, R.J., "Microbivores: Artificial Mechanical Phagocytes using Digest and Discharge Protocol", Journal of Evolution and Technology, Vol. 14, No. 4, pp. 1-52, (2005).
8
Freitas, R.J., "Clottocytes: Artificial Mechanical Platelets", Accessed on 11 November (2015); http:// www.imm.org/publications /reports /rep018/.
9
Hamdi, M., and Ferreira, A., "Design, Modeling and Characterization of Bio-nanorobotic Systems", Springer Dordrecht Heidelberg London New York, pp. 1-36, (2011).
10
Richardson, R.T., Alekseev, O.M., and Grossman, G., "Nuclear Autoantigenic Sperm Protein (NASP), a Linker Histone Chaperone that is Required for Cell Proliferation", Journal of Biological Chemistry, Vol. 281, No. 30, pp. 21526–21534, (2006).
11
Alekseev, O.M., Richardson, R.T., Alekseev,O., and O'Rand, M.G., "Analysis of Gene Expression Profiles in HeLa Cells in Response to Overexpression or SiRNA-mediated Depletion of NASP", Reproductive Biology and Endocrinology, Vol. 16, No. 7, pp. 45, (2009).
12
Pauwels, K., "Chaperoning Anfinsen: The Steric Foldases", Molecular Microbiology, Vol. 64, No. 4, pp. 917-922, (2007).
13
Ellis, R.J., and Van der Vies, S.M., "Molecular Chaperones", Annual Review of Biochemistry, Vol. 60, No. 11, pp. 321–347, (1991).
14
Van Montfort, R., Slingsby, C., and Vierling, E., "Crystal Structure and Assembly of a Eukaryotic Small Heat Shock Protein", Nature Structural Biology, Vol. 59, No. 12, pp. 105–156, (2001).
15
Jakob, U., Gaestel, M., Engel, K., and Buchner, J., "Small Heat Shock Proteins are Molecular Chaperones", Journal of Biological Chemistry, Vol. 268, No. 3, pp. 1517–1520, (1993).
16
Horwitz, J., "Alpha-crystallin Can Function as a Molecular Chaperone", Proceedings of the National Academy of Sciences, Vol. 89, No. 21, pp. 10449–10453, (1992).
17
Fan, Q., Huang, L. Z., Zhu, X. J., Zhang, K. K., Ye, H. F., Luo, Y., Sun, X. H., Zhou, P., and Lu, Y., "Identification of Proteins that Interact with Alpha A-crystallin using a Human Proteome Microarray", Molecular Vision, Vol. 20, No. 9, pp. 117–124, (2014).
18
Ghaffari, A., Shokuhfar, A., and Hasanzadeh Ghasemi, R., "Capturing and Releasing a Nano Cargo by Prefoldin Nano Actuator", Sensors and Actuators, B: Chemical, Vol. 171-172, No. 1, pp. 1199-1206, (2012).
19
Ghaffari, A., Shokuhfar, A., and Hasanzadeh Ghasemi, R., "Design and Simulation of a Novel Bio Nano Actuator by Prefoldin", 10th IEEE Conference on Nanotechnology, pp. 885-888, (2010).
20
Ghaffari, A., Shokuhfar, A., and Hasanzadeh Ghasemi, R., "Prefoldin: A Nano Actuator for Carrying the Various Size Nano Drugs", Journal of Computational and Theoretical Nanoscience , Vol. 8, No. 10, pp. 2078-2086, (2011).
21
Narberhaus, F., "Crystallin-type Heat Shock Proteins: Socializing Minichaperones in the Context of a Multichaperone Network", Microbiology and Molecular Biology Reviews, Vol. 66, No. 1, pp. 64–93, (2002).
22
Kennaway, Ch. K., Benesch, J. L. P., Gohlke, U., Wang, L., Robinson, C.V., Orlova, E.V., Saibi, H.R., and Keep, N. H., "Dodecameric Structure of the Small Heat Shock Protein Acr1 from Mycobacterium Tuberculosis", The Journal of Biological Chemistry, Vol. 280, No. 39, pp. 33419–33425, (2005).
23
Jalili, S., "Computer Simulation (Monte Carlo and Molecular Dynamics)", Tehran: Khajeh Nasir, (2007). (in Persian)
24
Foloppe, N., and MacKerell, A.D., "All-atom Empirical Force Field for Nucleic Acids: I. Parameter Optimization Based on Small Molecule and Condensed Phase Macromolecular Target Data", Journal of Computational Chemistry. Vol. 21, No. 2, pp. 86–104, (2000).
25
Kumar, Ch.V., Kumar, K.M., Swetha, R., and Ramaiah, S., "Protein Aggregation Due to nsSNP Resulting in P56S VABP Protein is Associated with Amyotrophic Lateral Sclerosis", Journal of Theoretical Biology, Vol. 354, No. 8, pp. 72-80, (2014).
26
ORIGINAL_ARTICLE
بررسی مد ترکیبی مکانیک شکست در استوانه ایزوتروپیک نامحدود تضعیف شده توسط چندین ترک استوانه ای
تحلیل تنش یک استوانه ایزوتروپیک تضعیف شده توسط چندین ترک استوانه ای هم محور با استوانه و تحت بارگذاری برشی و شعاعی بر روی سطح جانبی استوانه، در این مقاله مورد بررسی قرار میگیرد. در ابتدا حل نابجایی های سومیقلیانا و ولترا در استوانه با استفاده از حل گلرکین برای مسائل متقارن محوری بدست میآید. سپس با حل عددی معادلات انتگرالی که دارای تکینگی از نوع کوشی می باشند، دانسیته نابجایی های سومیقلیانا و ولترا روی سطوح ترکها محاسبه می گردد. با استفاده از دانسیته های نابجایی، ضرایب شدت تنش مدهای اول و دوم در چندین مثال بدست می آیند.
https://jmep.isme.ir/article_24895_f25d1b076cf0e9c289008b1f8562a22c.pdf
2017-05-22
34
60
استوانه نامحدود
نابجایی سومیقلیانا
نابجایی ولترا
ضریب شدت تنش
تکینگی کوشی
رضا
تیموری فعال
faal92@yahoo.com
1
دانشگاه زنجان
LEAD_AUTHOR
مهدی
پورسیفی
m_pourseifi@yahoo.com
2
دانشگاه زنجان
AUTHOR
[1] Farris, T. N., Kokini, K., and Demir, I., “The Cylindrical Crack”, Journal of Applied Mechanics. Vol. 56, No. 4, pp. 981-983, (1989).
1
[2] Demir, I., Hirth, J. P., and Zbib, H. M., “The Extended Stress Field around a Cylindrical Crack using the Theory of Dislocation Pile-ups”, International Journal of Engineering Science, Vol. 30, No. 7, pp. 829-845, (1992).
2
[3] Zbib, H. M., Hirth, J. P., and Demir, I., “The Stress Intensity Factor of Cylindrical Cracks”, International Journal of Engineering Science, Vol. 33, No. 2, pp. 247-253, (1995).
3
[4] Close, S., and Zbib, H. M., “The Stress Intensity Factors and Interaction between Cylindrical Cracks in Fiber-matrix Composites”, Studies in Applied Mechanics, Vol. 44, pp. 3-27, (1996).
4
[5] Itou, S., “Stresses around a Cylindrical Interface Crack under Shear”, Engineering Fracture Mechanics. Vol. 36, No. 4, pp. 631-638, (1990).
5
[6] Dhaliwal, R. S., Saxena, H. S., He, W., and Rokne, J. G., “Stress Intensity Factor for the Cylindrical Interface Crack between Nonhomogeneous Coaxial Finite Elastic Cylinders”, Engineering Fracture Mechanics, Vol. 43, No. 6, pp. 1039-1051, (1992).
6
[7] Xue-Li, H., and Duo, W., “The Crack Problem of a Fiber-matrix Composite with a Nonhomogeneous Interfacial Zone under Torsional Loading Part I. A Cylindrical Crack in the Interfacial Zone”, Engineering Fracture Mechanics, Vol. 54, No. 1, pp. 63-69, (1996).
7
[8] Itou, S., and Shima, Y., “Stress Intensity Factors around a Cylindrical Crack in an Interfacial Zone in Composite Materials”, International Journal of Solids and Structures, Vol. 36, No. 5, pp. 697-709, (1999).
8
[9] Itou, S., “Stress Intensity Factors for a Moving Cylindrical Crack in a Nonhomogeneous Cylindrical Layer in Composite Materials”, Archive of Applied Mechanics. Vol. 75, No. 1, pp. 18-30, (2005).
9
[10] Li, C., and Weng, G. J., “Dynamic Stress Intensity Factor of a Cylindrical Interface Crack with a Functionally Graded Interlayer”, Mechanics of Materials. Vol. 33, No. 6, pp. 325-333, (2001).
10
[11] Feng, W. J., Su, R. K. L., and Jiang, Z. Q., “Torsional Impact Response of a Cylindrical Interface Crack between a Functionally Graded Interlayer and a Homogeneous Cylinder”, Composite Structures, Vol. 68, No. 2, pp. 203-209, (2005).
11
[12] Li, Y. D., Zhao, H., and Xiong, T., “The Cylindrical Interface Crack in a Layered Tubular Composite of Finite Thickness under Torsion”, European Journal of Mechanics-A/Solids. Vol. 39, pp. 113-119, (2013).
12
[13] Lurʹe, A. I., “Three-Dimensional Problems of the Theory of Elasticity”, Interscience Publishers, (1964).
13
[14] Faal, R. T., Fariborz, S., and Daghyani, H. R., “Antiplane Deformation of Orthotropic Strips with Multiple Defects”, Journal of Mechanics of Materials and Structures, Vol. 1, No. 7, pp. 1097-1114, (2006).
14
[15] Erdogan, F., “Stress Intensity Factors”, Journal of Applied Mechanics, Vol. 50, No. 4, pp. 92-1002, (1983).
15
[16] Kasano, H., Matsumoto, H., and Nakahara, I., “A Torsion-free Axisymmetric Problem of a Cylindrical Crack in a Transversely Isotropic Body”, Bulletin of JSME. Vol. 27, No. 229, pp. 1323-1332, (1984).
16
[17] Gordeliy, E., and Detournay, E., “Displacement Discontinuity Method for Modeling Axisymmetric Cracks in an Elastic Half-space”, International Journal of Solids and Structures. Vol. 48, No. 19, pp. 2614-2629, (2011).
17
ORIGINAL_ARTICLE
ایجاد الگوریتم FACL و شبیه ساز عددی دمایی جهت تحلیل تنش سازه های هوافضایی
نگاشت کانتورهای خروجی نرم افزارهای سیالاتی بعنوان ورودی نرم افزار تحلیل سازه هوافضا، مانند بالکها و ریدومهای سرامیکی، ضروری است. لذا، الگوریتم FACL جهت تهیه فایل ورودی نرم افزار آباکوس بوسیله نگاشت کانتورهای خروجی نرم افزار فلوئنت، تهیه میگردد. به دلیل لحاظ نشدن، اثرات شیمیایی شوک، نتایج دمایی، نرم افزار فلوئنت، انحراف زیادی با نتایج تجربی دارد. لذا، ابتدا کد شبیه ساز دمایی، تدوین و نتایج آن با نتایج فشار ایرودینامیکی فلوئنت، ترکیب و فایل ورودی جهت تحلیل خودکار، سازه بوسیله نرم افزار آباکوس، تهیه می گردد. نتایج تحلیل بالک کنترلی نوعی، دلیلی بر دقیق بودن نتایج الگوریتم FACL است
https://jmep.isme.ir/article_24894_cb3a329a7d5e45d56efbc3d07419a97c.pdf
2017-05-22
78
100
کانتور فشار و دما
تحلیل خودکار
سازه های حساس هوافضایی
نگاشت
اثرات شیمیایی لایه شوک
محمد مهدی
دوستدار
mdostdar@ihu.ac.ir
1
دانشیار دانشگاه جامع امام حسین(ع)
مسئول مرکز موتور اسری
LEAD_AUTHOR
مرتضی
مردانی
mme_engine56@yahoo.com
2
دانشجو محقق
AUTHOR
فرهاد
قدک
fghadak@gmail.com
3
دانشیار دانشگاه جامع امام حسین(ع)
AUTHOR
[1] Anderson, J.D., "Hypersonic and High Temperature Gas Dynamics", McGraw-Hill, New York, ISBN:978-964-2751-04-4, pp. 45-132, (1989).
1
[2] Benzamine, J., Garland, A., and Swanson, G., "Aerodynamic Heating and Boundary-layer Transition on a 1/10-Power Nose Shape in Free Flight at Mach Numbers up to 6.7", NASA Research Memorandum: Resettle Langley Aeronautical Laboratory NASA, pp. 15-48, (1957).
2
[3] Chauvin, L., and Katherine, C., "Boundary-layer Transition and Heat-transfer Measurements from Flight Tests of Blunt and Sharp Cones at Mach Numbers from 1.7 to 4.7", NASA ARM L 57 D O 4, pp. 12-39, (1957).
3
[4] Howard, S., and Walter, E., "Heat-transfer and Pressure Distribution on Six Blunt Noses at a Mach Number of 2", NASA Research Memorandum: Resettle Langley Aeronautical Laboratory NASA, pp. 12-43, (1957).
4
[5] Chauvin, B. J., and Buglia, J., "Measurment of Outer and Inner Surface Temperature on a
5
Typical Blunt Nose in Free Flight at Mach Numbers up to 20", NASA ARM L70DO1, pp. 34-62, (1970).
6
[6] Robert, D.Q., "Real-time Aerodynamic Heating and Surface Temperature Calculations for Hypersonic Flight Simulation", NASA Technical Memorandum 4222, pp. 32-51, (1990).
7
[7] رحمانپور، م., ابراهیمی، ر،. شمس، م،. "حل میدان با احتساب واکنشهای شیمیایی غیرتعادلی به منظور محاسبه
8
چگالی الکترونی اطراف یک جسم با دماغه پخ"، دهمین کنفرانس دینامیک شاره ها، دانشگاه یزد، دانشکده مهندسی مکانیک، ص. 312-319، (1385).
9
[8] Rahimi, A., "Numerical Modeling of Charring Material Abalation with Considering Chemical Reaction, Mass Transfer and Surface Heat Transfer Effects", Journal of Thermophysicsand Heat Transfer, Vol. 15, No. 5, pp. 214-221, (2011).
10
[9] کریمیان، ح.، غفاریان، م.، عزیزی، م.، "حل جریان ماورا صوت بر روی بدنه موشک با در نظر گرفتن اثرات هوای
11
دما بالا جهت تعیین گرمایش آیرودینامیکی"، طرح پژوهشی، دانشگاه صنعتی امیرکبیر، دانشکده مهندسی هوا و
12
فضا، (1392).
13
[10] Benjamin, S., Roy, H., Paul, H.S., Baumanb, T., and Oliver, T. A., "Modeling Hypersonic Entry with the Fully-implicit Navier–Stokes (FIN-S) Stabilized Finite Element Flow Solver Computers & Fluids", Heat Transfer, Vol. 13, No. 4, pp. 281–292, (2014).
14
[11] هافمن، ک.ا.، چیانگ، ا.ت.، "دینامیک سیالات محاسباتی" ترجمه، احمدرضا عظیمیان.، مرکز نشر دانشگاه صنعتی اصفهان، ص. 234-284، (1383).
15
[12] Miner, E.W., "Computer User’s Guide for a Chemically Reacting Viscous Shock Layer Code", NASA CR-2551, (1975).
16
[13] سروش نیا، س.، بهشتیان.، ن.، "کاملترین مرجع کاربردی نرم افزار آباکوس"، انتشارات نگارنده دانش، ص.84-312، (1392).
17
ORIGINAL_ARTICLE
تحلیل ارتعاشات خمشی ورق های دایروی متخلخل اشباع شده با استفاده از روش مربعات دیفرانسیلی
پژوهش حاضر به تحلیل ارتعاشات ورقهای دایروی ساخته شده از مواد متخلخل میپردازد. ورق نسبتا نازک و خصوصیات مواد متخلخل به صورت توابعی که ارائه شده اند در راستای ضخامت ورق متغیر است. معادلات حاکم و شرایط مرزی بر اساس تئوری کلاسیک و با استفاده از اصل همیلتون حاصل میشوند. به کمک روش مربعات دیفرانسیلی، فرکانسهای طبیعی محاسبه میشوند. با افزایش تخلخل، فرکانس در توزیع غیرخطی متقارن تخلخل افزایش و در توزیع یکنواخت ثابت میماند و در هر دو توزیع، با افزایش فشردگی حفرات، فرکانس افزایش می یابد. نتایج در حالت ساده تر با پژوهشهای پیشین صحه گذاری شده اند.
https://jmep.isme.ir/article_24897_95488788c7393e713b22b8211935d793.pdf
2017-05-22
78
100
ارتعاشات آزاد
مواد متخلخل
ورق دایروی
روش مربعات دیفرانسیلی
احسان
آرشید
ehsanarshid@gmail.com
1
دانشجوی کارشناسی ارشد دانشگاه آزاد اسلامی ، تهران جنوب
AUTHOR
احمدرضا
خورشیدوند
ar_khorshidvand@azad.ac.ir
2
عضو هیات علمی دانشگاه آزاد اسلامی ، تهران جنوب
LEAD_AUTHOR
[1] Detournay, E., and Cheng, A. H. D., “Fundamentals of Poroelasticity”, Pergamon Press, New York, (1993).
1
[2] Abrate, S., “Free Vibration, Buckling and Static Deflections of Functionally Graded Plates”, Composites Science and Technology, Vol. 66, No. 14, pp. 2383-2394, (2006).
2
[3] Reddy, J. N., and Khdeir, A. A., “Buckling and Vibration of a Laminated Composite Plate using Various Plate Theories”, AIAA Journal, Vol. 27, No. 12, pp. 1808-1817, (1989).
3
[4] Decha-Umphai, K., and Mei, C., “Finite Element Method for Nonlinear Forced Vibrations of Circular Plates”, International Journal for Numerical Methods in Engineering, Vol. 23, No. 9, pp. 1715-1726, (1986).
4
[5] Wang, Y., Xu, R., and Ding, H., “Free Axisymmetric Vibration of FGM Circular Plates”, Applied Mathematics and Mechanics, Vol. 30, No. 9, pp. 1077-1082, (2009).
5
[6] Najafizadeh, M. M., and Heydari, H. R., “An Exact Solution for Buckling of Functionally Graded Circular Plates Based on Higher Order Shear Deformation Plate Theory under Uniform Radial Compression”, International Journal of Mechanical Sciences, Vol. 50, No. 3, pp. 603-612, (2008).
6
[7] Wu, T. Y., Wang, Y. Y., and Liu, G. R., “Free Vibration Analysis of Circular Plates using Generalized Differential Quadrature Rule”, Computer Methods in Applied Mechanics and Engineering, Vol. 191, No. 46, pp. 5365–5380, (2002).
7
[8] Brayan, G. H., “On the Stability of a Plane Plate under Thrust in its Own Plane with Application to the Buckling of the Side of a Ship”, Proceeding of the London Mathematical Society, Vol. 1, No. 1, pp. 54-67, (1890).
8
[9] Reismann, H., “Bending and Buckling of an Elastically Restrained Circular Plate”, Transactions of ASME Journal of Applied Mechanics, Vol. 19, No. 2, pp. 167–172, (1952).
9
[10] Amon, R., and Widera, O. E., “Stability of Edge-reinforced Circular Plate”, ASCE Journal of the Engineering Mechanics Division, Vol. 97, No. 5, pp. 1597–1601, (1971).
10
[11] Yamaki, N., “Buckling of a Thin Annular Plate under Uniform Compression”, Transactions of ASME Journal of Applied Mechanics, Vol. 25, No. 3, pp. 267–273, (1958).
11
[12] Klosner, J. M., and Forry, M. J., “Buckling of Simply Supported Plates under Arbitrary Symmetrical Temperature Distributions”, Journal of the Aerospace Sciences, Vol. 25, No. 9, pp. 181–184, (1958).
12
[13] Arshid, E., and Khorshidvand, A. R., “Numerical Solution of Free Vibrations Equations of Porous Circular Plates Based on Classical Theory”, Second National Conference of Civil, Architecture, Electricity and Mechanical Engineering, December 17, Gorgan, Iran, (2015). (In Persian)
13
[14] Reddy, J. N., “Mechanics of Laminated Composite Plates and Shells: Theory and Analysis”, CRC Press, New York, (2004).
14
[15] Brush, D. O., and Almorth, B. O., “Buckling of Bars, Plates and Shells”, McGraw-Hill, New York, (1975).
15
[16] Najafizadeh, M. M., and Eslami, M. R., “Buckling Analysis of Circular Plates of Functionally Graded Materials under Uniform Radial Compression”, International Journal of Mechanical Sciences, Vol. 44, No. 12, pp. 2479-2493, (2002).
16
[17] Jabbari, M., Mojahedin, A., Khorshidvand, A. R., and Eslami, M. R., “Buckling Analysis of a Functionally Graded Thin Circular Plate Made of Saturated Porous Materials”, Journal of Engineering Mechanics, Vol. 140, No. 2, pp. 287–295, (2013).
17
[18] Magnucka-Blandzi, E., “Axi-symmetrical Deflection and Buckling of Circular Porous-Cellular Plate”, Thin-Walled Structures, Vol. 46, No. 3, pp. 333–337, (2008).
18
[19] Khorshidvand, A. R., Farzaneh Joubaneh, E., Jabbari, M., and Eslami, M. R., “Buckling Analysis of a Porous Circular Plate with Piezoelectric Sensor-actuator Layers under Uniform Radial Compression”, Acta Mechanica, Vol. 225, No. 1, pp. 179-193, (2014).
19
[20] Liew, K. M., Han, J. B., Xiao, Z. M., and Du, H., “Differential Quadrature Method for Mindlin Plates on Winkler Foundations”, International Journal of Mechanical Sciences, Vol. 38, No. 4, pp. 405-421, (1996).
20
[21] Hosseini-Hashemi, Sh., and Khorami, K., “Analysis of Free Vibration of Moderately Thick Cylindrical Shells Made of Functionally Graded Materials using Differential Quadrature Method”, Modares Mechanical Engineering, Vol. 11, No. 2, pp. 93-106, (2011). (In Persian)
21
[22] Zong, Z., and Zhang, Y. Y., “Advanced Differential Quadrature Methods”, Chapman and Hall/CRC, New York, (2009).
22
[23] Theodorakopoulos, D. D., and Beskos, D. E., “Flexural Vibrations of Poroelastic Plates”, Acta Mechanica, Vol. 103, No. 4, pp. 191-203, (1994).
23
[24] Leissa, A. W., “Vibration of Plates”, NASA SP, Washington, (1969).
24
[25] Chen, D., Yang, J., and Kitipornchai, S., “Free and Forced Vibrations of Shear Deformable Functionally Graded Porous Beams”, International Journal of Mechanical Sciences, Vol. 108- 109, pp. 14-22, (2016).
25
ORIGINAL_ARTICLE
تحلیل انرژی سیستمهای چندجسمی انعطافپذیر دارای میرایی داخلی تحت شرایط برخورد
امروزه تحلیل سیستمهای مکانیکی چندجسمی با استفاده از روشهای دینامیک محاسباتی توسعه فراوانی یافته است. در هنگام کارکرد این سیستمها در سرعتهای بالا و تحت شرایط برخورد، فرض صلبیت اجسام نمیتواند منجر به تحلیل دقیق شود و تلفات انرژی ناشی از اثرات میرایی داخلی اجسام انعطافپذیر میتواند تا حد زیادی در رفتار سیستم تأثیرگذار باشد. این مورد به طور خاص در شرایط برخورد اجسام نمود بیشتری خواهد داشت. در این مقاله، با در نظر گرفتن میرایی داخلی برای میله رابط انعطافپذیر سیستم لنگ-لغزنده تحت برخورد با سرعت دورانی بالا، تأثیر پارامترهای مختلف با استفاده از روش دینامیک سیستمهای چندجسمی در کاهش ارتعاشات ناشی از نیروهای تماس مورد بررسی قرار میگیرد. میرایی داخلی عضو انعطافپذیر آن، از مدل تناسبی رایلی تبعیت میکند.پس از استخراج معادلات مقید حرکت به کمک روش افزایشی اویلر- لاگرانژ، تأثیر انعطافپذیری و میرایی داخلی، تحت شرایط برخورد برای سیستم لنگ-لغزنده دارای میله رابط انعطافپذیر نشان داده میشود. همچنین، تأثیر جنس مواد بر میرایی داخلی و کاهش ارتعاشات به دقت مورد بررسی قرار میگیرد.
https://jmep.isme.ir/article_24898_3ff933aabf9f0311ed9963e5d80f853e.pdf
2017-05-22
101
117
سیستمهای چندجسمی
انعطافپذیری
میرایی داخلی
برخورد
سعید
ابراهیمی
ebrahimi@yazd.ac.ir
1
دانشکده مهندسی مکانیک، دانشگاه یزد
LEAD_AUTHOR
سعید
نوری
saeed_mech_engineering@yahoo.com
2
دانشکده مهندسی مکانیک، دانشگاه یزد
AUTHOR
اسماعیل
سلحشور
esalahshoor@stu.yazd.ac.ir
3
دانشکده مهندسی مکانیک، دانشگاه یزد
AUTHOR
[1] Shabana, A.A., "Computational Dynamics", John Wiley & Sons, (2009).
1
[2] متقیان شویعی، ع.، حیدری شیرازی، ک.، "اثر انعطافپذیری اعضاء بر حرکت مکانیزمهای صفحهای"، کنفرانس ملی مهندسی مکانیک ایران، دانشگاه شیراز، 8 اسفند، (1392).
2
[3] Badlani, M., and Midha, A., "Effect of Internal Material Damping on the Dynamics of a Slider-crank Mechanism", Journal of Mechanisms, Transmissions and Automation in Design, Vol. 105, No. 3, pp. 452-459, (1983).
3
[4] Khulief, Y.A., and Shabana, A.A., "Dynamic Analysis of Constrained System of Rigid and Flexible Bodies with Intermittent Motion", Journal of Mechanisms, Transmissions and Automation in Design, Vol. 108, No. 1, pp. 38-45, (1986).
4
[5] Bakr, E.M., and Shabana, A.A., "Effect of Geometric Elastic Non-linearities on the Impact Response of Flexible Multibody Systems", Journal of Sound and Vibration, Vol. 112, No. 3, pp. 415-432, (1987).
5
[6] Cuadrado, J., Escalona, J., Schiehlen, W., and Seifried, R., "Role of MMS and IFToMM in Multibody Dynamics, in: Technology Developments: the Role of Mechanism and Machine Science and IFToMM, Ceccarelli, M. (Ed.), Vol. 2011, pp. 161-172, (2011).
6
[7] Shabana, A.A., "Dynamics of Multibody Systems", Cambridge University Press, (2013).
7
[8] De Silva, C.W., "Vibration: Fundamentals and Practice", CRC press, (2006).
8
[9] Bathe, K. J., "Finite Element Procedures", Prentice-Hall, Englewood Cliffs, NJ, (1996).
9
[10] Ebrahimi, S., "A Contribution to Computational Contact Procedures in Flexible Multibody Systems", PhD Thesis, Stuttgart University, (2007).
10
[11] Gilardi, G., and Sharf, I., "Literature Survey of Contact Dynamics Modelling", Mechanism and Machine Theory, Vol. 37, No.10, pp. 1213-1239, (2002).
11
[12] Khulief, Y.A., and Shabana, A.A., "A Continuous Force Model for the Impact Analysis of Flexible Multibody Systems", Mechanism and Machine Theory, Vol. 22, No. 3, pp. 213-224, (1987).
12
[13] Lankarani, H.M., and Nikravesh, P., "A Contact Force Model with Hysteresis Damping for Impact Analysis of Multibody Systems", Journal of Mechanical Design, Vol. 112, No. 3, pp. 369-376, (1990).
13
[14] Pereira, C.M., Ramalho, A.L., and Ambrósio, J.A., "A Critical Overview of Internal and External Cylinder Contact Force Models", Nonlinear Dynamics, Vol. 63, No. 4, pp. 681-697, (2011).
14
[15] Simeon, B., "Numerical Analysis of Flexible Multibody Systems", Multibody System Dynamics, Vol. 6, No. 4, pp. 305-325, (2001).
15
[16] Shabana, A.A., and Bassam, A.H., "A Two-loop Sparse Matrix Numerical Integration Procedure for the Solution of Differential-algebraic Equations: Application to Multibody Systems", Journal of Sound and Vibration, Vol. 327, No. 3, pp. 557-563, (2009).
16