[1] Bringhenti, C., and Barbosa, J.R., "Effects of Turbine Tip Clearance on Gas Turbine Performance", Proceedings of ASME Turbo Expo Berlin, Germany: Power for Land, Sea and Air, GT2008, (2008).
[2] Beheshti, B.H., Farhanieh, B., Ghorbanian, Teixeira, K.J.A., and Ivey, P.C., "Calculation of Tip Clearance Size Effects for the NASA Rotor 37 Compressor Blade", 13th Annual (International) Mechanical Engineering Conference, Isfahan University of Technology, Isfahan, Iran, ( 2005).
[3] Sheldon, K.E., "Analysis Methods to Control Performance Variability and Costs in Turbine Engine Manufacturing", Master Thesis, Department of Mechanical Engineering, Virginia Polytechnic and State University, (2001).
[4] Javier, A., Kypuros, K., and Melcher, J., "A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance", National Aeronautics and Space Administration, Glenn Research Center, NASA TM 212226, (2003).
[5] Smith, G. D. J., and Cumpsty, N. A., "Flow Phenomena in Compressor Casing Treatment", ASME Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 532-541, (1984).
[6] Chima R. V., "Calculation of Tip Clearance Effects in a Transonic Compressor Rotor", ASME Journal of Turbomachinery, Vol. 120, pp. 131-140, (1998).
[7] Dunham, J., "Cfd Validation for Propulsion System Components", AGARD Advisory Report 355, (1998).
[8] Reid, L., and Moore, R. D., "Design and Overall Performance of Four Highly Loaded, High-speed Inlet Stages for an Advanced High-pressure-ratio Core Compressor", NASA TP 1337, (1976).
[9] Ansys Turbo Grid Tutorials, Release 15.0. ANSYS, Inc, (2013).
[10] Celik, I. B., Ghia, U., Roache, P. J., Freita, Ch. J. S., Coleman, H., and Raad, P. E., "Procedure for Estimation and Reporting of Uncertainty due to Discretization in CFD Applications", ASME Journal of Fluids Engineering, Vol. 130, No. 7, 078001, (2008).
[11] CFX Limited, Waterloo, Ontario, Canada, "CFX-TASCFlow Theory Documentation", Section 4.1.2, Version 2.12, (2002).
[12] Gourdain, N., Wlassow, F., and Ottavy, X., "Effect of Tip Clearance Dimensions and Control of Unsteady Flows in a Multi-stage High-pressure Compressor", ASME Journal of Turbomachinery, Vol. 134, No. 5, 051005, (2012).
[13] Bae, J., Breuer, K.S, and Tan, C.S., "Active Control of Tip Clearance Flows in Axial Compressors", Journal of Turbomach, Vol. 127, No. 2, pp. 352-362, (2005).
)
