Iranian Journal of Mechanical Engineering Transactions of ISME

Iranian Journal of Mechanical Engineering Transactions of ISME

Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy

Authors
Amir Hossein Nasrollah Barati 1
Ali Asghar jafari 2
Shahram Etemadi Haghighi 3
Adel Maghsoudpour 1
1 Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran, Iran
3 Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
10.30506/ijmep.2021.521999.1756
Abstract
In this study, the forced vibrations of an annular circular plate with clamped edges under harmonic load is investigated. Analysis of circular plate is based on First-order Shear Deformation Theory (FSDT). The pseudoelastic behavior is simulated by Boyd-Lagoudas constitutive model. The Hamilton’s principle is used to obtain the equations of motion.In the state without phase change (pure austenite) the plate was examined in nonlinear conditions and compared with the existing reference.Differential Quadrature, Newmark methods, and convex cutting plane mapping algorithm are utilized to get the time and frequency responses of the plate. The phase transformation effects are studied on the time and frequency responses of the plate. Also, the harmonic load and the harmonic load, with a constant value are investigated. Then, the accuracy of these results is checked with the available literature and FEM software ABAQUS. The results indicate that the alloy phase transformation leads to reduced material strength and the nonlinear behavior of the alloy.
Keywords
Forced vibration
Annular circular plate
Shape memory alloy
Pseudoelastic
Differential quadrature method

Subjects

[1] Lagoudas, D.C., Editor, “Shape Memory Alloys Modeling and Engineering Applications", Springer, New York, (2008).
[2] Stoeckel, D.,"Nitinol Medical Devices and Implants", Minimally Invasive Therapy & Allied Technologies, Vol. 9(2), pp. 81-88, (2000).
[3] Seelecke, S., "Modeling the Dynamic Behavior of Shape Memory Alloys", International Journal of Non-linear Mechanics, Vol. 37(8), pp. 1363-1374, (2002).
[4] Raparelli, T., Zobel, P.B., and Durante, F., "Design of a Parallel Robot Actuated by Shape Memory Alloy Wires", Materials Transactions, Vol. 43(5), pp. 1015-1022, (2002).
[5] Du, X.W., Sun, G., and Sun, S.S., "A Study on the Deflection of Shape Memory Alloy (SMA) Reinforced Thermo-viscoelastic Beam", Composites Science and Technology, Vol. 64(9), pp. 1375-1381, (2004).
[6] Roh, J.H., Han, J.H., and Lee, I., "Nonlinear Finite Element Simulation of Shape Adaptive Structures with SMA Strip Actuator", Journal of Intelligent Material Systems and Structures, Vol. 17(11), pp. 1007-1022, (2006).
[7] Zhang, R.X., Ni, Q.Q., Masuda, A., Yamamura, T., and Iwamoto, M., "Vibration Characteristics of Laminated Composite Plates with Embedded Shape Memory Alloys". Composite Structures, Vol. 74(4), pp. 389-398, (2006).
[8] Sadjadpour, A., and Bhattacharya, K., "A Micromechanics-inspired Constitutive Model for Shape-memory Alloys", Smart Materials and Structures, Vol. 16(5), pp.1751, (2007).
[9] Chen, Y., Jiang, H.C., Liu, S.W., Rong, L. J., and Zhao, X.Q., "Damping Capacity of TiNibased Shape Memory Alloys", Journal of Alloys and Compounds, Vol. 482(1-2), pp. 151- 154, (2009).
[10] Hartl, D.J., and Lagoudas, D.C., "Constitutive Modeling and Structural Analysis Considering Simultaneous Phase Transformation and Plastic Yield in Shape Memory Alloys". Smart Materials and Structures, Vol. 18(10), pp. 104017, (2009).
[11] Mirzaeifar, R., Shakeri, M., and Sadighi, M., "Nonlinear Finite Element Formulation for Analyzing Shape Memory Alloy Cylindrical Panels", Smart Materials and Structures, Vol. 18(3), pp. 035002, (2009).
[12] Zbiciak, A., "Dynamic Analysis of Pseudoelastic SMA Beam". International Journal of Mechanical Sciences, Vol. 52(1), pp. 56-64, (2010).
[13] Shiau, L.C., Kuo, S.Y., and Chang, S.Y., "Free Vibration of Buckled SMA Reinforced Composite Laminates", Composite Structures, Vol. 93(11), pp. 2678-2684, (2011).
[14] Tobushi, H., Pieczyska, E., Miyamoto, K., and Mitsui, K., "Torsional Deformation Characteristics of TiNi SMA Tape and Application to Rotary Actuator", Journal of Alloys and Compounds, Vol. 577, pp. 745-748, (2013).
[15] Forouzesh, F., and Jafari, A.A., "Radial Vibration Analysis of Pseudoelastic Shape Memory Alloy Thin Cylindrical Shells by the Differential Quadrature Method", Thin- Walled Structures, Vol. 93, pp.158-168, (2015).
[16] Shakki, S., and Zakerzadeh, M.R., "Modeling and Control of a Shape Memory Alloy Actuator Using Fuzzy Sliding Mode Controller", Modares Mechanical Engineering, Vol. 16(7), pp. 353-360, (2016).
[17] Gandhi, Y., Pirondi, A., and Collini, L., "Optimal Design of Shape Memory Alloy Composite under Deflection Constraint", Materials, Vol. 12(11), pp. 1733, (2019).
[18] Jomehzadeh, E., Saidi, A.R., and Atashipour, S.R., "An Analytical Approach for Stress Analysis of Functionally Graded Annular Sector Plates", Materials & Design, Vol. 30(9), pp. 3679-3685, (2009).
[19] Hejripour, F., and Saidi, A.R., "Nonlinear Free Vibration Analysis of Annular Sector Plates Using Differential Quadrature Method", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 226(2), pp. 485-497, (2012).
[20] Bert, C.W., and Malik, M., "Differential Quadrature Method in Computational Mechanics", A Review, Applied Mechanics Reviews, Vol. 49(1), pp. 1–28, (1996).
[21] Shu, C., "Differential Quadrature and its Application in Engineering", Springer Science and Business Media, Dec 6, London, (2012).
[22] Reddy, JN., "An Introduction to Nonlinear Finite Element Analysis",with Applications to Heat Transfer, Fluid Mechanics, and Solid Mechanics. Oxford University Press, USA, (2015).
[23] Amini, M.H., Soleimani, M., Altafi, A., and Rastgoo, A., "Effects of Geometric Nonlinearity on Free and Forced Vibration Analysis of Moderately Thick Annular Functionally Graded Plate", Mechanics of Advanced Materials and Structures, Vol. 20(9), pp. 709-720, (2013).

  • Receive Date 03 January 2021
  • Revise Date 14 June 2021
  • Accept Date 26 June 2021