[1] Leissa, A.W., and Kang, J.H., “Exact Solutions for Vibration and Buckling of an SS-C-SS-C Rectangular Plate Loaded by Linearly Varying in-plane Stresses”, International Journal of Mechanical Sciences, Vol. 44, pp. 1925–1945, (2002).
[2] Wang, X., Wang, X., and Shi, X., “Accurate Buckling Loads of Thin Rectangular Plates under Parabolic Edge Compressions by the Differential Quadrature Method", International Journal of Mechanical Sciences, Vol. 49, pp. 447–453, (2007).
[3] Jana, P., and Bhaskar, K., “Analytical Solutions for Buckling of Rectangular Plates under Non-uniform Biaxial Compression or Uniaxial Compression with In-plane Lateral Restraint”, International Journal of Mechanical Sciences, Vol. 49, pp. 1104–1112, (2007).
[4] Kalyan, J.B., and Bhaskar, K., “An Analytical Parametric Study on Buckling of Non-uniformly Compressed Orthotropic Rectangular Plates”, Composite Structures, Vol. 82, pp. 10–18, (2008).
[5] Shariyat, M., and Asemi, K., “3D B-Spline Finite Element Nonlinear Elasticity Buckling Analysis of Rectangular FGM Plates under Non-uniform Edge Loads, using a Micromechanical Model”, Composite Structures, Vol. 112, pp. 397–408 (2014).
[6] El-Sawy, K.M., and Martini, M.I., “Elastic Stability of Bi-axially Loaded Rectangular Plates with a Single Circular Hole”, Thin-Walled Structures, Vol. 45, pp. 122–133, (2007).
[7] Komur, M.A., and Sonmez, M., “Elastic Buckling of Rectangular Plates under Linearly Varying In-plane Normal Load with a Circular Cutout”, Mechanics Research Communications, Vol. 35, pp. 361–371, (2008).
[8] Panda, S.K., and Ramachandra, L.S., “Buckling of Rectangular Plates with Various Boundary Conditions Loaded by Non-uniform in Plane Loads”, International Journal of Mechanical Sciences, Vol. 52, pp. 819–828, (2010).
[9] Yu, T., Yin, S., Bui, T.Q., Xia, S., Tanaka, S., and Hirose, S., “NURBS-based Isogeometric Analysis of Buckling and Free Vibration Problems for Laminated Composites Plates with Complicated Cutouts using a New Simple FSDT Theory and Level Set Method”, Thin-walled Structures, Vol. 101, pp. 141–156, (2016).
[10] Turvey, G.J., and Marshall, I.H., "Buckling and Postbuckling of Composite Plates", Springer, Germany, Dordrecht, (1995).
[11] Eslami, M.R., Hetnarski, R.B., Ignaczak, J., Noda, N., Sumi, N., and Tanigawa, Y., “Theory of Elasticity and Thermal Stresses”, Springer, Germany, Dordrecht, (2013).
[12] Ashrafi, H., Asemi, K., Shariyat, M., and Salehi, M., “Two-dimensional Modeling of Heterogeneous Structures using Graded Finite Element and Boundary Element Methods”, Meccanica, Vol. 48, pp. 663-680, (2013).
[13] Ashrafi, H., Asemi, K., and Shariyat, M., “A Three-dimensional Boundary Element Stress and Bending Analysis of Transversely/Longitudinally Graded Plates with Circular Cutouts under Biaxial Loading”, European Journal of Mechanics - A/Solids, Vol. 42, pp. 344–357, (2013).
[14] Ashrafi, H., and Shariyat, M., “A Three–dimensional Comparative Study of the Isoparametric Graded Boundary and Finite Element Methods for Nonhomogeneous FGM Plates with Eccentric Cutouts”, International Journal of Computational Methods, DOI: 10.1142/S0219876217500062.
[15] Eslami, M.R., “Finite Elements Methods in Mechanics”, Springer, Switzerland, (2014).
[16] Pandey, R., Shukla, K.K., and Jain, A., “Thermoelastic Stability Analysis of Laminated Composite Plates: An Analytical Approach”, Communications in Nonlinear Scientific and Numerical Simulations, Vol. 14, pp. 1679–1699, (2009).
