Iranian Journal of Mechanical Engineering Transactions of ISME

Iranian Journal of Mechanical Engineering Transactions of ISME

Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap

Authors
1 MSC Student of Mechanical Engineering at Amirkabir University
2 Department of Mechanical Engineering, Amirkabir University of Technology
Abstract
In this study, thermally induced vibrations of a Functionally Graded Material (FGM) Spherical Cap discussed. Distribution of shell properties in the direction of thickness is calculated from volume fraction relationship. Dependency to temperature is expressed based on the Touloukian formula. Thermal loading on the shell is axisymmetric and the response of the shell have been considered axially symmetric. Ceramic rich surface of the shell is subjected to temperature rise, whereas the metal rich surface of the shell is kept at reference temperature or thermally insulated. Temporal evolution of temperature profile across the shell thickness is obtained through solution of one-dimensional heat conduction equation. This equation is originally nonlinear since temperature dependency of thermal conductivity is taken into account.
The first-order shear theory and Von-Karman compatibility relations has been used for deriving the equation. Dynamics equations are derived using Hamilton's principle with the application of Ritz method has become a set of nonlinear time-dependent algebraic equations. Solving this set of equations is done with Newmark integral method help with numerical method Newton-Raphson. Solution of the transient one dimensional heat conduction equation with the arbitrary type of time-dependent boundary conditions is carried out employing the central finite difference method combined with the Crank–Nicolson time marching scheme. After validating the developed computer code, some parametric studies are accomplished to show the influences of various involved parameters. It is shown that temperature dependency, geometrical non-linearity, shell thickness, power law index, and the type of thermal loading, all affect the temporal evolution of plate characteristics.
Keywords

Subjects


[1] Boley, B.A., "Thermally Induced Vibrations of Beams", Journal of the Aeronautical Sciences, Vol. 23, No. 2, pp. 179-181, (1956).
 
[2] Boley, B.A., and Barber, A.D., "Dynamic Response of Beams and Plates to Rapid Heating", Journal of Applied Mechanics, Vol. 24, No. 5, pp. 413-425, (1957).
 
[3] Boley, B.A., Weiner, J.H., and Dill, E.H., "Theory of Thermal Stresses", Courier Corporation, New York, United States, pp. 58-60, (1961).
 
[4] Lyons, W.C., "Comments on Heat Induced Vibrations of Elastic Beams, Plates, and Shells", AIAA Journal, Vol. 4, No. 8, pp. 1502-1503, (1966).
 
[5] Beam, R.M., "On the Phenomenon of Thermoelastic Instability/thermal Flutter/of Booms with Open Cross Section", NASA TN D5222, (1969).
 
[6] Rimrott, F.P.J., and Abdelsayed, R., "Flexural Thermal Flutter under Laboratory Conditions", Transactions of the Canadian Society for Mechanical Engineering, Vol. 4, No. 4, pp. 189-196, (1977).
 
[7] Kraus, H., "Thermally Induced Vibrations of Thin Non Shallow Spherical Shells", AIAA Journal, Vol. 4, No. 3, pp. 500-505, (1966).
 
[8] Mayers, J., and Stroud, R.C., "Dynamic Response of Rapidly Heated Plate Elements", AIAA Journal, Vol. 9, No. 1, pp. 76-83, (1971).
 
[9] Venkataramana, J., and Jana, M.K., "Thermally Forced Vibrations of Beams", Journal of Sound and Vibration, Vol. 37, No. 2, pp. 291-295, (1974).
 
[10] Manolis, G.D., and Beskos, D.E., "Thermally Induced Vibrations of Beam Structures", Computer Methods in Applied Mechanics and Engineering, Vol. 21, No. 3, pp. 337-355, (1980).
 
[11] Mazumdar, J., Hill, D., and Clements, D.L., "Thermally Induced Vibrations of a Viscoelastic Plate", Journal of Sound and Vibration, Vol. 73, No. 1, pp. 31-39, (1980).
 
[12] Hill, D., Mazumdar, J., and Clements, D.L., "Dynamic Response of Viscoelastic Plates of Arbitrary Shape to Rapid Heating", International Journal of Solids and Structures, Vol. 18, No. 11, pp. 937-945, (1982).
 
[13] Mazumdar, J., and Hill, D., "Thermally Induced Vibrations of Viscoelastic Shallow Shells", Journal of Sound and Vibration, Vol. 93, No. 2, pp. 189-200, (1984).
 
[14] Hill, D.L., and Mazumdar, J., "A Study of the Thermally Induced Large Amplitude Vibrations of Viscoelastic Plates and Shallow Shells", Journal of Sound and Vibration, Vol. 116, No. 2, pp. 323-337, (1987).
 
[15] Nakajo, Y., and Hayashi, K., "Response of Circular Plates to Thermal Impact", Journal of Sound and Vibration, Vol. 95, No. 2, pp. 213-222, (1984).
 
[16] Bruch Jr, J.C., Adali, S., Sadek, I.S., and Sloss, J.M., "Structural Control of Thermoelastic Beams for Vibration Suppression", Journal of Thermal Stresses, Vol. 16, No. 3, pp. 249-263, (1993).
 
[17] Tauchert, T. R., "Thermal Shock of Orthotropic Rectangular Plates", Journal of Thermal Stresses, Vol. 12, No. 2, pp. 241-258, (1989).
 
[18] Jeng-Shian, C., Jiunn-Hsiung, W., and Tseng-Zong, T., "Thermally Induced Vibration of Thin Laminated Plates by Finite Element Method", Computers & Structures, Vol. 42, No. 1, pp. 117-128, (1992).
 
[19] Huang, N.N., and Tauchert, T.R., "Thermally Induced Vibration of Doubly Curved Cross-ply Laminated Panels", Journal of Sound and Vibration, Vol. 154, No. 3, pp. 485-494, (1992).
 
[20] Huang, N. N., and Tauchert, T.R., "Large-amplitude Vibration of Graphite-reinforced Aluminum Cylindrical Panels Subjected to Rapid Heating", Composites Engineering, Vol. 3, No. 6, pp. 557-566, (1993).
 
[21] Khdeir, A. A., "Thermally Induced Vibrations of Cross-ply Laminated Shallow Shells", Acta. Mechanica, Vol. 151, No. 3, pp. 135-147, (2001).
 
[22] Khdeir, A. A., "Thermally Induced Vibration of Cross-ply Laminated Shallow Arches", Journal of Thermal Stresses, Vol. 24, No. 11, pp. 1085-1096, (2001).
 
 [23] Kiani, Y., and Eslami, M.R., "Geometrically Non-linear Rapid Heating of Temperature-dependent Circular FGM Plates", Journal of Thermal Stresses, Vol. 37, No. 12, pp. 1495-1518, (2014).
 
[24] Ghiasian, S.E., Kiani, Y., and Eslami, M.R., "Non-linear Rapid Heating of FGM Beams", International Journal of Non-Linear Mechanics, Vol. 67, pp. 74-84, (2014).
 
[25] Alipour, S.M., Kiani, Y., and Eslami, M.R., "Rapid Heating of FGM Rectangular Plates", Acta. Mechanica, Vol. 227, No. 2, pp. 421-436, (2016).
 
[26] Reddy, J.N., "Mechanics of Laminated Composite Plates and Shells: Theory and Analysis", CRC Press, (2004).
 
[27] Hetnarski, R.B., Eslami, M.R., and Gladwell, G.M.L., "Thermal Stresses: Advanced Theory and Applications", Vol. 41, Springer, New York, (2009).
 
[28] Reddy, J.N., "An Introduction to Nonlinear Finite Element Analysis: with Applications to Heat Transfer, Fluid Mechanics, and Solid Mechanics", OUP Oxford, (2014).
 
[29] Lee, J., "Free Vibration Analysis of Spherical Caps by the Pseudo Spectral Method", Journal of Mechanical Science and Technology, Vol. 23, No. 1, pp. 221-228, (2009).
 
[30] Reddy, J.N., and Chin, C.D., "Thermomechanical Analysis of Functionally Graded Cylinders and Plates", Journal of Thermal Stresses, Vol. 21, No. 6, pp. 593-626, (1998).
Volume 20, Issue 3 - Serial Number 52
System Dynamics and Solid Mechanics
Autumn 2018
Pages 133-169

  • Receive Date 16 May 2017
  • Revise Date 31 July 2017
  • Accept Date 15 December 2018