[1] Saha, S.K., "Thermal and Friction Characteristics of Turbulent Flow Through Rectangular
and Square Ducts with Transverse Ribs and Wire-coil Inserts", Experimental Thermal and
Fluid Science, Vol. 34, pp. 575-589, (2010).
[2] Deshmukh, P.W., and Vedula, R.P., "Heat Transfer and Friction Factor Characteristics of
Turbulent Flow Through a Circular Tube Fitted with Vortex Generator Inserts",
International Journal of Heat and Mass Transfer, Vol. 79, pp. 551-560, (2014).
[3] Gorman, J., Sparrow, E.M., Ilamparuthi, S., and Minkowycz, W.J., "Effect of Fan-generated
Swirl on Turbulent Heat Transfer and Fluid Flow in a Pipe", International Journal of Heat
and Mass Transfer, Vol. 95, pp. 1019-1025, (2016).
[4] You, Y., Fan, A., Liang, Y., Jin, S., Liu, W., and Dai, F., "Entropy Generation Analysis for
Laminar Thermal Augmentation with Conical Strip Inserts in Horizontal Circular Tubes",
International Journal of Thermal Sciences, Vol. 88, pp. 201-214, (2015).
[5] Bahiraei, M., Gharagozloo, K., and Moayedi, H., "Experimental Study on Effect of
Employing Twisted Conical Strip Inserts on Thermohydraulic Performance Considering
Geometrical Parameters", International Journal of Thermal Sciences, Vol. 149, pp. 169-178,
(2020).
[6] Liu, P., Zheng, N., Shan, F., Liu, Z., and Liu, W., "Heat Transfer Enhancement for Laminar
Flow in a Tube using Bidirectional Conical Strip Inserts", International Journal of Heat and
Mass Transfer, Vol. 127, pp. 1064-1076, (2018).
[7] Ibrahim, M.M., Essa, M.A., and Mostafa, N.H., "A Computational Study of Heat Transfer
Analysis for a Circular Tube with Conical Ring Turbulators", International Journal of
Thermal Sciences, Vol. 137, pp. 138-160, (2019).
[8] Liu, P., Zheng, N., Shan, F., Liu, Z., and Liu, W., "An Experimental and Numerical Study
on the Laminar Heat Transfer and Flow Characteristics of a Circular Tube Fitted with
Multiple Conical Strips Inserts", International Journal of Heat and Mass Transfer, Vol. 117,
pp. 691-709, (2018).
[9] Pourramezan, M., and Ajam, H., "Modeling for Thermal Augmentation of Turbulent Flow
in a Circular Tube Fitted with Twisted Conical Strip Inserts", Applied Thermal Engineering,
Vol. 105, pp. 509-518, (2016).
[10] Pourramezan, M., Ajam, H., Raoufi, M.A., and Abadeh, A., "Performance Evaluation and
Optimization of Design Parameters for Twisted Conical Strip Inserts in Tubular Laminar
Flow using Taguchi Approach", International Journal of Thermal Sciences, Vol. 152, pp.
106324, DOI:10.1016/j.ijthermalsci.2020.106324, (2020).
[11] Liu, P., Zheng, N., Liu, Z., and Liu, W., "Thermal-hydraulic Performance and Entropy
Generation Analysis of a Parabolic Trough Receiver with Conical Strip Inserts", Energy
Conversion and Management, Vol. 179, pp. 30-45, (2019).
[12] You, Y., Fan, A., Liu, W., and Huang, S., "Thermo-hydraulic Characteristics of Laminar
Flow in an Enhanced Tube with Conical Strip Inserts", International Journal of Thermal
Sciences, Vol. 61, pp. 28-37, (2012).
[13] Cao, Z., and Xu, J., "Modulated Heat Transfer Tube with Short Conical-mesh Inserts: A
Linking from Microflow to Macroflow", International Journal of Heat and Mass Transfer,
Vol. 89, pp. 291-307, (2015).
[14] Fan, A., Deng, J., Guo, J., and Liu, W., "A Numerical Study on Thermo-hydraulic
Characteristics of Turbulent Flow in a Circular Tube Fitted with Conical Strip Inserts",
Applied Thermal Engineering, Vol. 31, pp. 2819-2828, (2011).
[15] Liu, P., Zheng, N., Rui, L., Shan, F., Liu, Z., and Liu, W., "PIV Measurement of Flow
Structures in a Circular Heat Exchange Tube with Central Slant Rod Inserts", Energy
Procedia, Vol. 142, pp. 3793-3798, (2017).
[16] Kongkaitpaiboon, V., Nanan K., and Eiamsa-Ard, S., "Experimental Investigation of Heat
Transfer and Turbulent Flow Friction in a Tube Fitted with Perforated Conical-rings",
International Communications in Heat and Mass Transfer, Vol. 37, pp. 560-567, (2010).
[17] Muthusamy, C., Vivar, M., Skryabin, I., and Srithar, K., "Effect of Conical Cut-out
Turbulators with Internal Fins in a Circular Tube on Heat Transfer and Friction Factor",
International Communications in Heat and Mass Transfer, Vol. 44, pp. 64-68, (2013).
[18] Promvonge, P., "Heat Transfer Behaviors in Round Tube with Conical Ring Inserts",
Energy Conversion and Management, Vol. 49, pp. 8-15, (2008).
19 ] وحیدی فر، س.، کهرم، م.، ماموریان، م.، "مطالعهی تجربی انتقال حرارت تحریکشده در لوله با موانع ]
.(1395) ،65- مختلف در جریانهای مغشوش"، مجله مهندسی مکانیک، صفحه 71
[20] Salari, S., and Kgoudarzi, K., "Effects of Tube Geometry with Turbulator on Increasing
the Thermal Performance of the Heaters used in Gas Stations", Energy: Engineering &
Managment, Vol. 8, pp. 40-49, (2018).
[21] Al-Obaidi, A.R., and Sharif, A., "Investigation of the Three-dimensional Structure,
Pressure Drop, and Heat Transfer Characteristics of the Thermohydraulic Flow in a
Circular Pipe with Different Twisted-tape Geometrical Configurations", Journal of
Thermal Analysis and Calorimetry, Vol. 143, No. 5, pp. 1-26, (2020).
[22] Virgilio, M., Mayo, I., Dedeyne, J., Van Geem, K.M., Marin, G.B., and Arts, T., "Effects
of 2-D and 3-D Helical Inserts on the Turbulent Flow in Pipes", Experimental Thermal
and Fluid Science, Vol. 110, pp. 109-123, (2020).
[23] Promvonge, P., and Skullong, S., "Thermo-hydraulic Performance in Heat Exchanger Tube
with V-shaped Winglet Vortex Generator", Applied Thermal Engineering, Vol. 164, pp.
114-124, (2020).
[24] Nalavade, S.P., Prabhune, C.L., and Sane, N.K., "Effect of Novel Flow Divider Type
Turbulators on Fluid Flow and Heat Transfer", Thermal Science and Engineering
Progress, Vol. 9, pp. 322-331, (2019).
[25] Verma, A., Kumar, M., and Patil, A.K., "Enhanced Heat Transfer and Frictional Losses in
Heat Exchanger Tube with Modified Helical Coiled Inserts", Heat and Mass Transfer, Vol.
54, pp. 3137-3150, (2018).
[26] Suri, A.R.S., Kumar, A., and Maithani, R., "Experimental Investigation of Heat Transfer
and Fluid Flow Behaviour in Multiple Square Perforated Twisted Tape with Square Wing
Inserts Heat Exchanger Tube", Heat and Mass Transfer, Vol. 54, pp. 1813-1826, (2018).
[27] Sharafeldeen, M., Berbish, N.S., Moawed, M.A., and Ali, R.K., "Experimental
Investigation of Heat Transfer and Pressure Drop of Turbulent Flow Inside Tube with
Inserted Helical Coils", Heat and Mass Transfer, Vol. 53, pp. 1265-1276, (2017).
[28] Kamboj, K., Singh, G., Sharma, R., Panchal, D., and Hira, J., "Heat Transfer Augmentation
in Double Pipe Heat Exchanger using Mechanical Turbulators", Heat and Mass Transfer,
Vol. 53, pp. 553-567, (2017).
[29] Cheng, J., Qian, Z., Wang, Q., Fei, C., and Huang, W., "Numerical Study of Heat Transfer
and Flow Characteristic of Twisted Tube with Different Cross Section Shapes", Heat and
Mass Transfer, Vol. 55, pp. 823-844, (2019).
[30] Barzegar, A., and Vahid, D.J., "Numerical Study on Heat Transfer Enhancement and Flow
Characteristics of Double Pipe Heat Exchanger Fitted with Rectangular Cut Twisted
Tape", Heat and Mass Transfer, Vol. 55, pp. 3455-3472, (2019).
[31] Yadav, S., Paulraj, M.P., and Sahu, S.K.,"Thermal Performance of Air to Water Heat
Exchanger with Plain Surface Disc Turbulators: Experimental and Numerical Study",
Heat and Mass Transfer, pp. 1-15, (2020).
[32] Noorbakhsh, M., Zaboli, M., and Ajarostaghi, S.S.M., "Numerical Evaluation of the Effect
of using Twisted Tapes as Turbulator with Various Geometries in Both Sides of a Doublepipe
Heat Exchanger", Journal of Thermal Analysis and Calorimetry, pp. 1-13, (2019).
[33] Chang, S.W., and Yu, K. C., "Heat Transfer Enhancement by Spirally Coiled Spring Inserts
with and without Segmental Solid Cords", Experimental Thermal and Fluid Science, Vol.
97, pp. 119-132, (2018).
[34] Bartwal, A., Gautam, A., Kumar, M., and Chamoli, S., "Thermal Performance
Intensification of a Circular Heat Exchanger Tube Integrated with Compound Circular
Ring–metal Wire Net Inserts", Chemical Engineering and Processing-Process
Intensification, Vol. 124, pp. 50-70, (2018).
[35] Sheikholeslami, M., Gorji-Bandpy, M., and Ganji, D.D., "Experimental Study on
Turbulent Flow and Heat Transfer in an Air to Water Heat Exchanger using Perforated
Circular-ring", Experimental Thermal and Fluid Science, Vol. 70, pp. 185-195, (2016).
[36] Dittus, F., and Boelter, L., University of California Publications on Engineering.
University of California Publications in Engineering, Vol. 2, pp. 371-390, (1930).
[37] Gnielinski, V., "New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel
Flow", Int. Chem. Eng., Vol. 16, No. 2, pp. 359-368, (1976).
[38] Kays, W.M., and Crawford, M.E., "Convective Heat and Mass Transfert", 3rd Edition,
McGraw-Hill, (1993).
[39] Petukhov, B.S., "Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical
Properties", in Advances in Heat Transfer, J.P. Hartnett and T.F. Irvine, Editors., Elsevier.
pp. 503-564, (1970).
[40] Moody, L.F., "Friction Factors for Pipe Flow", Trans. ASME, Vol. 66, pp. 671-684,
(1944).
[41] Ruengpayungsak, K., Wongcharee, K., Thianpong, C., Pimsarn, M., Chuwattanakul, V.,
and Eiamsa-ard, S., "Heat Transfer Evaluation of Turbulent Flows Through Gear-ring
Elements", Applied Thermal Engineering, Vol. 123, pp. 991-1005, (2017).
[42] Thianpong, C., Eiamsa-ard, P., Promvonge, P., and Eiamsa-ard, S., "Effect of Perforated
Twisted-tapes with Parallel Wings on Heat Tansfer Enhancement in a Heat Exchanger
Tube", Energy Procedia, Vol. 14, pp. 1117-1123, (2012).
[43] Promvonge, P., and Eiamsa-ard, S., "Heat Transfer Behaviors in a Tube with Combined
Conical-ring and Twisted-tape Insert", International Communications in Heat and Mass
Transfer, Vol. 34, pp. 849-859, (2007).
[44] Sheikholeslami, M., Ganji, D., and Gorji-Bandpy, M., "Experimental and Numerical
Analysis for Effects of using Conical Ring on Turbulent Flow and Heat Transfer in a
Double Pipe air to Water Heat Exchanger", Applied Thermal Engineering, Vol. 100, pp.
805-819, (2016).
[45] Singh, S., Chander, S., and Saini, J.S., "Heat Transfer and Friction Factor Correlations of
Solar Air Heater Ducts Artificially Roughened with Discrete V-down Ribs", Energy, Vol.
36, pp. 5053-5064, (2011).
[46] Kumar, R., Kumar, A., and Goel, V., "Performance Improvement and Development of
Correlation for Friction Factor and Heat Transfer using Computational Fluid Dynamics
for Ribbed Triangular Duct Solar Air Heater", Renewable Energy, Vol. 131, pp. 788-799,
(2019).
[47] Yadav, S., and Sahu, S.K., "Heat Transfer Augmentation in Double Pipe Water to Air
Counter Flow Heat Exchanger with Helical Surface Disc Turbulators", Chemical
Engineering and Processing - Process Intensification, Vol. 135, pp. 120-132, (2019).
)
