[1] D. K. Chouhan, S. Biswas, A. K. Singh, and A. J. Shukla, “High Tensile Strength-ductility Combination in Cold Multiaxial Plane-strain Forged and Rolled Nanostructured Titanium,”
Materialia, Vol. 11, Article No. 100698, 2020,
https://doi.org/10.1016/j.mtla.2020.100698.
[2] N. Maruthuvakudi Venkatram, S. Alsabeeha, N. R Weston, Z. Liu, and D. N. Mavris, “Life Cycle Assessment and Risk Management of Titanium for Aerospace Applications,” in
AIAA SCITECH 2024 Forum, pp. 8-12, Orlando, FL, 2024,
https://doi.org/10.2514/6.2024-1216.
[3] K.-T. Kim, S. S. Nisar, and H.-C. Choe, “Mechanical Octacalcium Phosphate Coatings on the Plasma Electrolytic Oxidized Pure Titanium for Bio-implant Use,”
Surface and Coatings Technology, Vol. 480, Article No. 130602, 2024,
https://doi.org/10.1016/j.surfcoat.2024.130602.
[4] W. Li, S. Wang, Z. Huang, S. Li, Z. Huang, and H. Yu, “Anisotropic Mechanism of Cold-rolled Pure Titanium Plate During the Two-step Tensile Process of the Variable Path,”
Materials Science and Engineering: A, Article No. 2024,
https://doi.org/10.1016/j.msea.2024.146755.
[5] Y. Harada, K. Ogawa, and T. Aoki, “Effects of Thermomechanical Treatments on Tensile Properties of Pure Titanium,” in
Materials Science Forum, Vol. 1107, pp. 117–122, 2023,
https://www.scientific.net/MSF.1107.117.
[6] W. Li, S. Li, and H. Yu, “Research on the Anisotropy of Plastic Behavior and Deformation Mechanism of Textured Pure Titanium,”
Materials Characterization, Vol. 194, Article No. 112483, 2022,
https://doi.org/10.1016/j.matchar.2022.112483.
[7] B. Zhou, R. Yang, B. Wang, L. Deng, and Y. Zhang, “Twinning Behavior of Pure Titanium During Rolling at Room and Cryogenic Temperatures,”
Materials Science and Engineering: A, Vol. 803, Article No. 140458, 2021,
https://doi.org/10.1016/j.msea.2020.140458.
[8] E. P. Utomo, F. Rokhmanto, S. Herbirowo, and C. Sutowo, “Optimization of Ti-30Nb-xSn Alloys on Morphological, Mechanical and Corrosion Properties,”
Advances in Materials and Processing Technologies, Vol. 10, No. 3, pp. 2634–2642, 2024,
https://doi.org/10.1080/2374068X.2023.2226920.
[9] B. Seo, H.-K. Park, C.-S. Park, and K. Park, “Effect of Alloying Elements on Corrosion Properties of High Corrosion Resistant Titanium Alloys in High Concentrated Sulfuric Acid,”
Materials Today Communications, Vol. 34, Article No. 105131, 2023,
https://doi.org/10.1016/j.mtcomm.2022.105131.
[10] E. Y. Hussein, J. M. S. Al-Murshdy, N. S. Radhi, and Z. Al-Khafaji, “Surface Modification of Titanium Alloy by Titania/Silver Multilayers Coating for Biomedical Application,”
Journal of Advanced Research in Micro and Nano Engineering, Vol. 20, No. 1, pp. 66–78, 2024,
https://doi.org/10.37934/armne.20.1.6678.
[11] E. Marin, and A. Lanzutti, “Biomedical Applications of Titanium Alloys: A Comprehensive Review,”
Materials (Basel), Vol. 17, No. 1, pp. 114, 2023,
https://doi.org/10.3390/ma17010114.
[12] J. Kim, Q. T. Pham, J. Ha, and Y. S. Kim, “Constitutive Modeling of Commercial Pure Titanium Sheet Based on Non-associated Flow Rule and Differential Hardening,”
International Journal of Mechanical Sciences, Vol. 230, Article No. 107549, 2022,
https://doi.org/10.1016/j.ijmecsci.2022.107549.
[13] A. Jäger, V. Gärtnerova, and K. Tesař, “Microstructure and Anisotropy of the Mechanical Properties in Commercially Pure Titanium after Equal Channel Angular Pressing with Back Pressure at Room Temperature,”
Materials Science and Engineering: A, Vol. 644, pp. 114–120, 2015,
https://doi.org/10.1016/j.msea.2015.07.038.
[14] T. Hama, A. Kobuki, and H. Takuda, “Crystal-plasticity Finite-element Analysis of Anisotropic Deformation Behavior in a Commercially Pure Titanium Grade 1 Sheet,”
International Journal of Plasticity, Vol. 91, pp. 77–108, 2017,
https://doi.org/10.1016/j.ijplas.2016.12.005.
[15] S. V. Zherebtsov, G. S. Dyakonov, A. A. Salem, S. P. Malysheva, G. A. Salishchev, and S. L. Semiatin, “Evolution of Grain and Subgrain Structure During Cold Rolling of Commercial-purity Titanium,”
Materials Science and Engineering: A, Vol. 528, No. 9, pp. 3474–3479, 2011,
https://doi.org/10.1016/j.msea.2011.01.039.
[16] M. N. Bidgoli and L. Jing, “Anisotropy of Strength and Deformability of Fractured Rocks,”
Journal of Rock Mechanics and Geotechnical, Vol. 6, No. 2, pp. 156–164, 2014,
https://doi.org/10.1016/j.jrmge.2014.01.009.
[17] Y. Wu, R. Fan, M. Chen, K. Wang, J. Zhao, and W. Xiao, “High-temperature Anisotropic Behaviors and Microstructure Evolution Mechanisms of a near-α Ti-alloy Sheet,”
Materials Science and Engineering: A, Vol. 820, pp. 141560, 2021,
https://doi.org/10.1016/j.msea.2021.141560.
[18] C. Moon, S. Thuillier, J. Lee, and M.-G. Lee, “Mechanical Properties of Solution Heat Treated Al-Zn-Mg-Cu (7075) Alloy under Different Cooling Conditions: Analysis with Full Field Measurement and Finite Element Modeling,”
Journal of Alloys and Compounds, Vol. 856, Article No.158180, 2021,
https://doi.org/10.1016/j.jallcom.2020.158180.
[19] J. W. Won, B.-C. Suh, J. H. Kim, D. W. Lee, and Y.-T. Hyun, “Texture Development of Pure Ti by Rolling at Various Temperatures and Its Effect on Sheet Formability,”
Journal of Materials Research and Technology, Vol. 32, pp. 2214–2223, 2024,
https://doi.org/10.1016/j.jmrt.2024.08.038.
[20] G. Liu, Y. Yang, X. Luo, B. Huang, Z. Kou, and P. Li, “Improving the Mechanical Properties of Titanium Films by Texture Strengthening,”
Materials Characterization, Vol. 127, pp. 365–370, 2017,
https://doi.org/10.1016/j.matchar.2017.03.015.
[21] M. A. W. Lowden and W. B. Hutchinson, “Texture Strengthening and Strength Differential in Titanium-6al-4v,”
Metallurgical Transactions A, Vol. 6, pp. 441–448, 1975,
https://doi.org/10.1007/BF02658401.
[22] L. Wang,
H. Zhang,
G. Huang, M. Cao, X. Cao,
E. Mostaed, and
M. Vedani, “Formability and Anisotropy of the Mechanical Properties in Commercially Pure Titanium after Various Routes Normal and Different Speed Rolling,”
Journal of Materials Research, Vol. 31, No. 21, pp. 3372–3380, 2016,
https://doi.org/10.1557/jmr.2016.352.
[23] H. Nasiri-Abarbekoh, A. Ekrami, A. A. Ziaei-Moayyed, and M. Shohani, “Effects of Rolling Reduction on Mechanical Properties Anisotropy of Commercially Pure Titanium,”
Materials & Design, Vol. 34, pp. 268–274, 2012,
https://doi.org/10.1016/j.matdes.2011.06.024.
[24] U. Bathini, T. S. Srivatsan, A. Patnaik, and T. Quick, “A Study of the Tensile Deformation and Fracture Behavior of Commercially Pure Titanium and Titanium Alloy: Influence of Orientation and Microstructure,”
Journal of Materials Engineering and Performance, Vol. 19, No. 8, pp. 1172–1182, 2010,
https://doi.org/10.1007/s11665-010-9613-5.
[25] S. Wang, L. Niu, C. Chen, Y. Pang, B. Liao, Z. H. Zhong, P. Lu, P. Li, X. D. Wu, J. W. Coenen, L.F. Cao, and Y.C. Wu, “Size Effects on the Tensile Properties and Deformation Mechanism of Commercial Pure Titanium Foils,”
Materials Science and Engineering: A, Vol. 730, pp. 244–261, 2018,
https://doi.org/10.1016/j.msea.2018.06.009.
[26] L. Chang, Z. Miao, B. Zhou, C. Zhou, and X. He, “Understanding the Anisotropic Tensile Deformation Behavior of Commercially Pure Titanium by Experiments and Crystal Plasticity Simulations,”
Materials Letters, Vol. 339, Article No. 134095, 2023,
https://doi.org/10.1016/j.matlet.2023.134095.
[27] G. G. Yapici, I. Karaman, and H. J. Maier, “Mechanical Flow Anisotropy in Severely Deformed Pure Titanium,”
Materials Science and Engineering: A, Vol. 434, No. 1–2, pp. 294–302, 2006,
https://doi.org/10.1016/j.msea.2006.06.082.
[28] L. D. K. Catherine, and D. B. A. Hamid, “The Effect of Heat Treatment on the Tensile Strength and Ductility of Pure Titanium Grade 2,” IOP Conference Series: Materials Science and Engineering, Vol. 429, No. 1, Article No. 12014, 2018, doi: 10.1088/1757-899X/429/1/012014.
[29] E. ASTM, “Standard Test Methods for Tension Testing of Metallic Materials”, Annual Book of ASTM Standards, Designation: E8/E8M − 13aAmerican, Provided by IHS under license with ASTM, Association State Highway and Transportation Officials Standard AASHTO No. T68 an American National Standard, 2001.
[30] S. S. S. Kumar, B. Pavithra, V. Singh, P. Ghosal, and T. Raghu, “Tensile Anisotropy Associated Microstructural and Microtextural Evolution in A Metastable Beta Titanium Alloy,”
Materials Science and Engineering: A, Vol. 747, pp. 1–16, 2019,
https://doi.org/10.1016/j.msea.2019.01.053.
[31] W. J. Harrison, M. T. Whittaker, and R. J. Lancaster, “A Model for Time Dependent Strain Accumulation and Damage at Low Temperatures in Ti–6al–4v,”
Materials Science and Engineering: A, Vol. 574, pp. 130–136, 2013,
https://doi.org/10.1016/j.msea.2013.02.070.
[32] G. Del Guercio, M. Galati, A. Saboori, P. Fino, and L. Iuliano, “Microstructure and Mechanical Performance of Ti–6al–4v Lattice Structures Manufactured via Electron Beam Melting (EBM): A Review,”
Acta Metallurgica Sinica (English Letters), Vol. 33, No. 2, pp. 183–203, 2020,
https://doi.org/10.1007/s40195-020-00998-1.
[33] S. Wronski,
K. Wierzbanowski, M. Jędrychowski, J. Tarasiuk,
M. Wronski,
A. Baczmanski, and B. Bacroix, “Microstructure Evolution of Titanium after Tensile Test,”
Materials Science and Engineering: A, Vol. 656, pp. 1–11, 2016,
https://doi.org/10.1016/j.msea.2015.12.041.
