بررسی آزمایشگاهی و شبیه سازی اثر تغییرات هندسی صفحات مبدل حرارتی صفحه ای در بهبود عملکرد آن

[1] Soontarapiromsook, J., Mahian, O., Dalkilic, A.S., and Wongwises, S., "Effect of Surface
Roughness on the Condensation of R-134a in Vertical Chevron Gasketed Plate Heat
Exchangers", Experimental Thermal and Fluid Science, Vol. 91, pp. 54-63, (2018).
[2] Galeazzo, F. C., Miura, R. Y., Gut, J. A., and Tadini, C. C., "Experimental and Numerical
Heat Transfer in a Plate Heat Exchanger", Chemical Engineering Science, Vol. 61, No. 21,
pp. 7133-7138, (2006).
[3] Lin, J., Huang, C., and Su, C., "Dimensional Analysis for the Heat Transfer Characteristics
in the Corrugated Channels of Plate Heat Exchangers", International Communications in
Heat and Mass Transfer, Vol. 34, No. 3, pp. 304-312, (2007).
[4] Kumar, V., Tiwari, A. K., and Ghosh, S. K., "Effect of Chevron Angle on Heat Transfer
Performance in Plate Heat Exchanger using ZnO/water Nanofluid", Energy Conversion and
Management, Vol. 118, pp. 142-154, (2016).
[5] Li, W., Li, H. X., Li, G. Q., and Yao, S. C., "Numerical and Experimental Analysis of
Composite Fouling in Corrugated Plate Heat Exchangers", International Journal of Heat
and Mass Transfer, Vol. 63, pp. 351-360, (2013).
[6] Tovazshnyansky, L.L., Kapustenko, P.O., Khavin, G.L., and Arsenyeva, O.P., "PHEs in
Industry", NTU KhPI, Kharkiv, Ukraine, (2004).
[7] Sundén, B., Manglik, R. M., and Wang, L., "Plate Heat Exchangers: Design, Applications
and Performance", Wit Press, Vol. 11, pp. 8-45, (2007).
[8] Wang, Y. N., Lee, J.P., Park, M.H., Jin, B.J., Yun, T.J., and Song, Y.H., "A Study on 3D
Numerical Model for Plate Heat Exchanger", Procedia Engineering, Vol. 174, pp. 188-194,
(2017).
[9] Luan, Z. J., Zhang, G. M., Tian, M. C., and Fan, M.X., "Flow Resistance and Heat Transfer
Characteristics of a New-type Plate Heat Exchanger", Journal of Hydrodynamics, Vol. 20,
No. 4, pp. 524-529, (2008).
[10] Khan, T., Khan, M., Chyu, M. C., and Ayub, Z., "Experimental Investigation of Single
Phase Convective Heat Transfer Coefficient in a Corrugated Plate Heat Exchanger for
Multiple Plate Configurations", Applied Thermal Engineering, Vol. 30, No. 8-9, pp. 1058-
1065, (2010).
[11] Kumar, B., Soni, A., and Singh, S., "Effect of Geometrical Parameters on the Performance
of Chevron Type Plate Heat Exchanger", Experimental Thermal and Fluid Science, Vol.
91, pp. 126-133, (2018).
[12] Focke, W., and Knibbe, P., "Flow Visualization in Parallel-plate Ducts with Corrugated
Walls", Journal of Fluid Mechanics, Vol. 165, No. 1, pp. 73-77, (1986).
[13] Gaiser, G., and Kottke, V., "Effects of Wavelength and Inclination Angle on the
Homogeneity of Local Heat Transfer Coefficients in Plate Heat Exchangers", in
International Heat Transfer Conference 11, Kyongju, Korea, 23-28 August (1998).
[14] Pinto, J., and Gut, J., "A Screening Method for the Optimal Selection of Plate Heat
Exchanger Configurations", Brazilian Journal of Chemical Engineering, Vol. 19, No. 4,
pp. 433-439, (2002).
[15] Faizal, M., and Ahmed, M. R., "Experimental Studies on a Corrugated Plate Heat
Exchanger for Small Temperature Difference Applications", Experimental Thermal and
Fluid Science, Vol. 36, pp. 242-248, (2012).
[16] Kumar, V., Tiwari, A. K., and Ghosh, S. K., "Effect of Variable Spacing on Performance
of Plate Heat Exchanger using Nanofluids", Energy, Vol. 114, pp. 1107-1119, (2016).
[17] Zhang, J., Diao, Y., Zhao, Y., and Zhang, Y., "Experimental study of TiO2–Water
Nanofluid Flow and Heat Transfer Characteristics in a Multiport Minichannel Flat Tube",
International Journal of Heat and Mass Transfer, Vol. 79, pp. 628-638, (2014).
[18] Gulenoglu, C., Akturk, F., Aradag, S., Uzol, N.S., and Kakac, S., "Experimental
Comparison of Performances of Three Different Plates for Gasketed Plate Heat
Exchangers", International Journal of Thermal Sciences, Vol. 75, pp. 249-256, (2014).
[19] Durmuş, A., Benli, H., Kurtbaş, İ., and Gül, H., "Investigation of Heat Transfer and
Pressure Drop in Plate Heat Exchangers Having Different Surface Profiles", International
Journal of Heat and Mass Transfer, Vol. 52, No. 5-6, pp. 1451-1457, (2009).
[20] Jain, S., Joshi, A., and Bansal, P., "A New Approach to Numerical Simulation of Small
Sized Plate Heat Exchangers with Chevron Plates", Vol. 129, pp. 291-297, (2007).
[21] Jokar, A., and O'Halloran, S. P., "Heat Transfer and Fluid Flow Analysis of Nanofluids in
Corrugated Plate Heat Exchangers using Computational Fluid Dynamics Simulation",
Journal of Thermal Science and Engineering Applications, Vol. 5, No. 1, pp. 2-11, (2013).
[22] Fernandes, C. S., Dias, R. P., Nóbrega J. M., and M. Maia, J., "Laminar Flow in Chevrontype
Plate Heat Exchangers: CFD Analysis of Tortuosity, Shape Factor and Friction
Factor", Chemical Engineering and Processing: Process Intensification, Vol. 46, No. 9, pp.
825-833, (2007).
[23] Gullapalli, V. S., and Sundén, B., "CFD Imulation of Heat Transfer and Pressure Drop in
Compact Brazed Plate Heat Exchangers", Heat Transfer Engineering, Vol. 35, No. 4, pp.
358-366, (2014).
[24] Muthuraman, S., "Investigation of Brazed Plate Heat Exchangers with Variable Chevron
Angles", American J. of Engineering Research, Vol. 2, pp. 90-107, (2013).
[25] Shaji, K., and Das, S. K., "Effect of Plate Characteristics on Axial Dispersion and Heat
Transfer in Plate Heat Exchangers", Journal of Heat Transfer, Vol. 135, No. 4, pp. 1591-
1602, (2013).