[1] Al Shakarji, R., "Mechanisms of Acid Mist Formation in Electrowinning", Ph. D. Thesis, James Cook University, Australia, Townsville, (2012).
[2] Sigrist, L., and Dossenbach, O., "Mass Transport in Electrolytic Cells with Gas Sparging", International Journal Heat and Mass Transfer, Vol. 22, pp. 1393-1399, (1979).
[3] Raju, G. J. V. J., Venkateswarlu, P., Rao, S. S., and Sarma, C. B., "Effect of Longitudinal Distance of Electrode on the Ionic Mass Transfer on the Confining Wall of a Stirred Vessel", Indian J. Technol., Vol. 5, pp. 400-401, (1979).
[4] Raju C. R., Raju, G. J., and Rao, C. V., "Effect of Pulsation on Mass Transfer Coefficients Ionic Mass Transfer", Indian Journal of Technology, Vol. 5, pp. 30-34, (1967).
[5] Fisher, K. G., and Hughes, R. G., "Application of Periodic Current Reversal (P.C.R.) to Electrolytic Copper Refining at Mufulira", Trans. Inst. Min. Metall, Vol. 80, pp. 250-261, (1971).
[6] Rao V. P., "Mass Transfer Cylinders Rotating about Parallel Axes", Ph. D. Thesis, Andhra University, Visakhapatnam, India, (1974).
[7] Subbaiah T., Venkateswarlu, P., Das, R. P., and Raju, G. J. V. J., "Mass Transfer Conditions at a Cathode Support Plate in an Electrochemical Cell", Chemical Engineering Processing: Process Intensification, Vol. 34, No. 6, pp. 495-501, (1995).
[8] Taha, A. A., "Effect of Surfactants on the Rate of Solid Liquid Mass Transfer with Gas Generation at the Interface", Journal of Colloid and Interface Science, Vol. 275, No. 1, pp. 235-242, (2004).
[9] Graydon, J., and Kirk, D., "Suspension Codeposition in Electrowinning Cells: The Role of Hydrodynamics", Can. J. Chem. Eng, Vol. 69, pp. 564-570, (2001).
[10] Najim, S. T., "Estimation of Mass Transfer Coefficient for Copper Electrowinning Process", Journal of Engineering, Vol. 22, pp. 158-168, (2016).
[11] Beukes, N. T., and Badenhorst, J., "Copper Electrowinning: Theoretical and Practical Design", Presented at the Hydrometallurgy Conference 2009, The Southern African Institute of Mining and Metallurgy, Johannesburg, South Africa, (2009).
[12] Cifuentes, L., and Arriagada, P., "Copper Electrowinning in a Moving-bed Cell Based on Reactive Electrodialysis", Revista de Metalurgia, Vol. 44, pp. 151-161, (2008).
[13] Najminoori, M., Mohebbi, A., Afrooz, K., and Arabi, B. G., "The Effect of Magnetic Field and Operating Parameters on Cathodic Copper Winning in Electrowinning Process", Chemical Engineering Science, Vol. 199, pp. 1-19, (2019).
[14] Soliman, H., and El-Moneim A. A., "Electrowinning of Copper using Rotating Cylinder Electrode Utilizing Lead Anode", Scientific Research, Vol. 3, pp. 340-358, (2011).
[15] Coleman, S., and Roy, S., "Effect of Ultrasound on Mass Transfer during Electrodeposition for Electrodes Separated by a Narrow Gap", Chemical Engineering Science, Vol. 113, pp. 35-44, (2014).
[16] Filzwieser, A., "Modelling of the Processes Close to Cathodes in Copper Electrolysis (Modellierung der Kathodennahen Vorgänge in der Kupferelektrolyse)", Ph. D. Thesis, Montanuniversität Leoben, University of Leoben, Austria, (2000).
[17] Filzwieser, A., Hein, K., and Mori, G., "Current Density Limitation and Diffusion Boundary Layer Calculation using CFD Method", JOM, Vol. 54, pp. 28-31, (2002).
[18] Leahy, M. J., and Schwarz, M. P., "Experimental Validation of a Computational Fluid Dynamics Model of Copper Electrowinning", Metallurgical and Materials Transactions B, Vol. 41, pp. 1247-1260, (2010).
[19] Schwarz M. P., "Improving Zinc Processing using Computational Fluid Dynamics Modelling Successes and Opportunities", Minerals Engineering, Vol. 30, pp. 12-18, (2012).
[20] Leahy, M. J., and Schwarz, M. P., "Flow and Mass Transfer Modelling for Copper Electrowinning: Development of Instabilities along Electrodes", Hydrometallurgy, Vol. 147-148, pp. 41-53, (2014).
[21] Najminoori, M., Mohebbi, A., Arabi, B. G., and Daneshpajouh, S., "CFD Simulation of an Industrial Copper Electrowinning Cell", Hydrometallurgy, Vol. 153, pp. 88-97, (2015).
[22] Pourahmadi, S. A. A., and Talebi, S., "Hydrodynamic Simulation of Two Phase Flow in an Industrial Electrowinning Cell", Modares Mechanical Engineering, Vol. 20, No. 1, pp. 1-12, (2020).
[23]"ANSYS CFX-Solver Theory Guide, Release 15", ed, (2016).
[24] König, J., Mühlenhoff, S., Eckert K., Büttner, L., Odenbach, S., and Czarske, J., "Velocity Measurements Inside the Concentration Boundary Layer During Copper-magneto-Electrolysis using a Novel Laser Doppler Profile Sensor", Electrochimica Acta, Vol. 56, No. 17, pp. 6150-6156, (2011).
[25] Geankoplis, C. J., "Transport Processes and Separation Process Principles: (Includes Unit Operations)", Prentice Hall Professional Technical Reference, Pearson Education Limited, London, United Kingdom, (2003).
[26] Gendron, A., and Ettel, V., "Hydrodynamic Studies in Natural and Forced Convection Electrowinning Cells", The Canadian Journal of Chemical Engineering, Vol. 53, No. 1, pp. 36-40, (1975).
[27] Werner, J.M., "Modeling and Validation for Optimization of Electrowinning Performance", Ph.D. Thesis, The University of Utah, Salt Lake City, Utah, United States, (2017).
[28] Sutherland, W., "The Viscosity of Gases and Molecular Force", Philosophical Magazine, Vol. 36, pp. 507-531, (1893).
[29] Moats, M. S., Hiskey, J. B., and Collins, D. W., "The Effect of Copper, Acid, and Temperature on the Diffusion Coefficient of Cupric Ions in Simulated Electrorefining Electrolytes", Hydrometallurgy, Vol. 56, No. 3, pp. 255-268, (2000).
[30] Pourtousi, M., Sahu, J., Ganesana, P., Shamshirband, S., and Redzwan, G., "A Combination of Computational Fluid Dynamics (CFD) and Adaptive Neuro-fuzzy System (ANFIS) for Prediction of the Bubble Column Hydrodynamics", Powder Technology, Vol. 274, pp. 466-481, (2015).
[31] Rigby, G.D., Grazier, E.P., Stuart, A.D., and Smithson, E.P., "Gas Bubble Induced Mixing in Electrowinning Baths", Vol. 56, No. 21-22, pp. 6329-6336, (2001).
)
