Iranian Journal of Mechanical Engineering Transactions of ISME

Numerical Simulation of Pool Boiling on a Grooved Horizontal Surface

Volume 24, Issue 2, September 2022, Pages 77-91

10.30506/ijmep.2022.543011.1835

saman ramezani; shahram talebi

-

Volume 13, Issue 3, December 2020, Pages 79-102

Mohammad Hossain jalaei; Reza Akbari alashti; Mohammad Eftari

Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration

Volume 25, Issue 1, June 2023, Pages 80-96

10.30506/ijmep.2023.532943.1806

M. Abolfazl Mokhtari; Mohsen Rostmi

Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow

Volume 21, Issue 4, February 2020, Pages 83-106

Koorosh Goudarzi; Amin Moosaei; Maryam Bahrami

Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings

Volume 24, Issue 4, March 2023, Pages 83-108

10.30506/ijmep.2022.534010.1811

Amirhossein Fartash; Esmaeil Poursaeidi

Boring bar chatter control using a novel adaptive direct velocity feedback controller

Volume 23, Issue 1, June 2021, Pages 85-109

10.30506/ijmep.2020.106431.1565

Mohsen Fallah; Behnam Moetakef-Imani

ِDerivation of nonlinear dynamic equations of tractor-trailer mobile robots and their motion control employing input-output linearization control method

Volume 24, Issue 2, September 2022, Pages 92-106

10.30506/ijmep.2022.543719.1837

mostafa nazemizadeh; pouya Mallahi kolahi

Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding

Volume 23, Issue 3, December 2022, Pages 93-113

10.30506/ijmep.2021.117692.1658

Mohammad Hadi Abedi; Rouhollah Hosseini; Alireza Naddaf Oskuyi

analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot

Volume 23, Issue 4, March 2022, Pages 93-113

10.30506/ijmep.2021.135745.1727

Vahid Ehteshami Bejnordi; Hassan Salarieh; Aria Alasti; MohammadMahdi Kakaei

Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator

Volume 24, Issue 3, December 2022, Pages 94-119

10.30506/ijmep.2022.525295.1770

Hojat Taei; Sepideh Ayati; Seyed Fazlollah Mousavi

-

Volume 14, Issue 3, December 2012, Pages 95-111

Amin Yaghotyan; Farhang Honarvar

Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions

Volume 23, Issue 2, September 2021, Pages 96-113

10.30506/ijmep.2020.113522.1628

Mohammad Hamisi; S. Ebrahim Moussavi

Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm

Volume 25, Issue 1, June 2023, Pages 97-127

10.30506/ijmep.2022.545059.1841

Rahmat Abedzadeh Maafi; Shahram Etemadi Haghighi; Mohammad Javad Mahmoodabadi

Improve the performance of a rotor blade by changing the distance between the tipping point and axial displacement of the blade

Volume 21, Issue 4, February 2020, Pages 107-129

iraj mirzaee; amir shayan azadeh; Nader pormahmod

Optimization of vortex tube parameters to achieve the minimum possible temperature

Volume 24, Issue 2, September 2022, Pages 107-133

10.30506/ijmep.2022.546657.1850

Mohammad Ali Mashayekhi; Ali Mirmohammadi

Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method

Volume 24, Issue 4, March 2023, Pages 109-128

10.30506/ijmep.2022.540955.1829

Mohsen yousefi; Mohammad Kazem Moayyedi

Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem

Volume 23, Issue 1, June 2021, Pages 110-129

10.30506/ijmep.2021.108014.1577

M. Abolfazl Mokhtari

Determining the magic tire model parameters using self-organizing map method and assessment the road condition on the parameters

Volume 23, Issue 2, September 2021, Pages 114-128

10.30506/ijmep.2020.114532.1630

Negar Afaghi Sardroud; asad modares motlag; arash ranjbaran

Design of the L90 automobile gearbox fault detection system using the audio signal analysis

Volume 23, Issue 4, March 2022, Pages 114-132

10.30506/ijmep.2021.136715.1730

Mohammad Zadshakoyan; Abolfazl Gholami

Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay

Volume 23, Issue 3, December 2022, Pages 114-130

10.30506/ijmep.2021.120319.1673

nasim ensansefat masouleh; Ali Chaibakhsh; Ali Jamali; Reza Shahnazi

A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications

Volume 24, Issue 3, December 2022, Pages 120-133

10.30506/ijmep.2022.556735.1890

Amir Ghafari; Ali Ghaffari; Niusha pourjafari

Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets

Volume 25, Issue 1, June 2023, Pages 128-167

10.30506/ijmep.2023.1972041.1902

Sahar Goudarzi Hafshejani; Yaser Kiani

Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load

Volume 23, Issue 2, September 2021, Pages 129-156

10.30506/ijmep.2020.114529.1633

Mohammad Salari; Hossein Mahinabad

Experimental investigation of thermal performance of a sample of solar water heater vacuum tube modified with the help of nanofluids

Volume 24, Issue 4, March 2023, Pages 129-147

10.30506/ijmep.2022.139448.1788

mojtaba shafiee; amir farbeh

Effect of blade section profile on the starting time of a micro-wind turbine

Volume 21, Issue 4, February 2020, Pages 130-148

Abolfazl Pourrajabian; Morteza Rahmanpour

Iranian Journal of Mechanical Engineering Transactions of ISME

Journal Archive

Volume 26 (2024)

Volume 25 (2023)

Volume 24 (2022)

Volume 23 (2021)

Volume 22 (2020)

Volume 21 (2019)

Volume 20 (2018)

Volume 19 (2017)

Volume 18 (2016)

Volume 17 (2015)

Volume 16 (2014)

Volume 15 (2013)

Volume 14 (2012)

Volume 13 (2011)