[1] R. Shokri-Oojghaz, R. Moradi-Dastjerdi, H. Mohammadi, and K. Behdinan, “Stress Distributions in Nanocomposite Sandwich Cylinders Reinforced by Aggregated Carbon Nanotube”, Polymer Composites, Vol. 40, pp. 1918-1927, 2019/01/11/ 2019, https://doi.org/10.1002/pc.25206.
[2] H. Bisheh, and A. Alibeigloo, “Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity”,
Iranian Journal of Mechanical Engineering Transactions of ISME, Vol. 24, pp. 6-27, 2021/12/18/ 2021,
https://doi.org/10.30506/ijmep.2022.117060.1653.
[3] F. Abbaspour, and H. Arvin Boroujeni, “Buckling Analysis of Micro-plates Reinforced with Graphene Platelets with Piezoelectric Face-sheets”,
Iranian Journal of Mechanical Engineering Transactions of ISME, Vol. 24, pp. 6-32, 2022/04/05/ 2022,
https://doi.org/10.30506/ijmep.2022.127796.1701.
[4] H. Mohammadi, O. Weeger, and M. Shojaee, “Isogeometric Technique for Dynamic Instability Analysis of Nanocomposite Folded Plates Based on Higher-order Shear Deformation Theory”,
Thin-Walled Structures, Vol. 177, pp. 109467, 2022/05/19/ 2022,
https://doi.org/10.1016/j.tws.2022.109467.
[5] H. Mohammadi, “On the Mechanical Buckling Analysis of FG-GRC Laminated Plates with Temperature-dependent Material Properties using Isogeometric Approach”, International Journal of Structural Stability and Dynamics, Vol. 23, pp. 2350092, 2022/10/12/ 2022, https://doi.org/10.1142/S021945542350092X, 2019/01/11/ 2019.
[6] H. Babaei, Y. Kiani, and K. K. Żur, “New Insights into Nonlinear Stability of Imperfect Nanocomposite Beams Resting on a Nonlinear Medium”,
Communications in Nonlinear Science and Numerical Simulation, Vol. 118, pp. 106993, 2022/10/07/ 2022,
https://doi.org/10.1016/j.cnsns.2022.106993.
[7] H. Mohammadi, “Isogeometric Free Vibration Analysis of Trapezoidally Corrugated FG-GRC Laminated Panels using Higher-order Shear Deformation Theory”,
Structures, Vol. 48, pp. 642-656, 2023/01/01/ 2023,
https://doi.org/10.1016/j.istruc.2023.01.001.
[8] H. Wu, J. Yang, and S. Kitipornchai, “Dynamic Instability of Functionally Graded Multilayer Graphene Nanocomposite Beams in Thermal Environment”,
Composite Structures, Vol. 162, pp. 244-254, 2016/12/02/ 2016,
https://doi.org/10.1016/j.compstruct.2016.12.001.
[9] Y. Liang, S. Zheng, S. Wang, and D. Chen, “Nonlinear Isogeometric Analysis of Axially Functionally Graded Graphene Platelet-reinforced Composite Curved Beams”,
Composite Structures, Vol. 330, pp. 117871, 2023/12/30/ 2023,
https://doi.org/10.1016/j.compstruct.2023.117871.
[10] P. Han, F. Tian, and H. Babaei, “Thermally Induced Large Deflection Analysis of Graphene Platelet Reinforced Nanocomposite Cylindrical Panels”,
Structures, Vol. 53, pp. 1046-1056, 2023/04/29/ 2023,
https://doi.org/10.1016/j.istruc.2023.04.123.
[11] Y. W. Zhang, and G. L. She, “Nonlinear Low-velocity Impact Response of Graphene Platelet-reinforced Metal Foam Cylindrical Shells under Axial Motion with Geometrical Imperfection”,
Nonlinear Dynamics, Vol. 111, pp. 6317–6334, 2022/12/23/ 2022,
https://doi.org/10.1007/s11071-022-08186-9.
[12] C. Chen, D. Li, X. Zhou, and L. Zhou, “Thermal Vibration Analysis of Functionally Graded Graphene Platelets-reinforced Porous Beams using the Transfer Function Method”,
Engineering Structures, Vol. 284, pp. 115963, 2023/03/05/ 2023,
https://doi.org/10.1016/j.engstruct.2023.115963.
[13] Z. Dai, and Y. Kiani, “Stability of Higher-order Lattice Composite Cylindrical Shell Reinforced with Graphene Platelets by Means of a Chebyshev Collocation-based Semi-analytical Approach”,
Engineering Structures, Vol. 296, pp. 116952, 2023/09/22/ 2023,
https://doi.org/10.1016/j.engstruct.2023.116952.
[14] S. Mollaei, M. Babaei, and K. Asemi, “Torsional Buckling of Functionally Graded Graphene Reinforced Composite Laminated Cylindrical Panel”,
Archive of Applied Mechanics, Vol. 93, pp. 427–435, 2022/11/15/ 2022,
https://doi.org/10.1007/s00419-022-02132-2.
[15] M. Babaei, F. Kiarasi, M. Soltani Tehrani, A. Hamzei, E. Mohtarami, and K. Asemi, “Three Dimensional Free Vibration Analysis of Functionally Graded Graphene Reinforced Composite Laminated Cylindrical Panel”,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 12, pp. 3932, 2022/04/13/ 2022,
https://doi.org/10.1177/14644207211073445.
[16] M. Mirzaei, and M. Abbasi, “Dynamic Response of Moderately Thick Graphene Reinforced Composite Cylindrical Panels under the Action of Moving Load”,
Engineering Analysis with Boundary Elements, Vol. 146, pp. 292-305, 2022/10/27/ 2022,
https://doi.org/10.1016/j.enganabound.2022.10.032.
[17] Y. Tian, Q. Li, Y. Feng, Y. Yu, D. Wu, X. Chen, and W. Gao, “Nonlinear Dynamic Analysis of the Functionally Graded Graphene Platelets Reinforced Porous Plate under Moving Mass”,
Thin-Walled Structures, Vol. 183, pp. 110363, 2022/11/10/ 2022,
https://doi.org/10.1016/j.tws.2022.110363.
[18] A. Eyvazian, C. Zhang, M. Alkhedher, S. Muhsen, and M. A. Elkotb, “Thermal Buckling and Post-buckling Analyses of Rotating Timoshenko Microbeams Reinforced with Graphene Platelet”,
Composite Structures, Vol. 304, pp. 116358, 2022/10/07/ 2022,
https://doi.org/10.1016/j.compstruct.2022.116358.
[19] H. Wu, Z. Zheng, J. Guo, L. Li, Y. Bao, and J. Yang, “Axisymmetric Thermal Postbuckling of Functionally Graded Graphene Nanocomposite Annular Plates with Various Geometric Imperfections”,
Thin-Walled Structures, Vol. 185, pp. 110594, 2023/01/31/ 2023,
https://doi.org/10.1016/j.tws.2023.110594.
[20] H. Zhang, W. Ye, S. Sahmani, and B. Safaei, “Quasi-3D Nonlinear Primary Resonance of Randomly Oriented CNT-reinforced Micro/Nano-beams Incorporating Nonlocal and Couple Stress Tensors”,
Acta Mechanica, Vol. 234, pp. 3259–3285, 2023/03/18/ 2023,
https://doi.org/10.1007/s00707-023-03554-x.
[21] M. Sobhy, M. A. Abazid, and F. H. H. Al Mukahal, “Electro-thermal Buckling of FG Graphene Platelets-strengthened Piezoelectric Beams under Humid Conditions”,
Advances in Mechanical Engineering, Vol. 14, 2022/04/08/ 2022,
https://doi.org/10.1177/16878132221091005.
[22] M. Ganapathi, B. Anirudh, C. Anant, and O. Polit, “Dynamic Characteristics of Functionally Graded Graphene Reinforced Porous Nanocomposite Curved Beams Based on Trigonometric Shear Deformation Theory with Thickness Stretch Effect”, Mechanics of Advanced Materials and Structures, Vol. 28, pp. 741-752, 2019/02/18/ 2019, https://doi.org/10.1080/15376494.2019.1601310.
[23] P. Jafari, and Y. Kiani, “A Four-variable Shear and Normal Deformable Quasi-3D Beam Model to Analyze the Free and Forced Vibrations of FG-GPLRC Beams under Moving Load”,
Acta Mechanica, Vol. 233, pp. 2797–2814, 2022/05/11/ 2022,
https://doi.org/10.1007/s00707-022-03256-w.
[24] Y. Wang, and Y. Kiani, “Effects of Initial Compression/Tension, Foundation Damping and Pasternak Medium on the Dynamics of Shear and Normal Deformable GPLRC Beams under Moving Load”,
Materials Today Communications, Vol. 33, pp. 104938, 2022/11/13/ 2022,
https://doi.org/10.1016/j.mtcomm.2022.104938.
[25] R. Priyanka, C. M. Twinkle, and J. Pitchaimani, “Stability and Dynamic Behavior of Porous FGM Beam: Influence of Graded Porosity, Graphene Platelets, and Axially Varying Loads”,
Engineering with Computers, Vol. 38, pp. 4347–4366, 2021/08/02/ 2021,
https://doi.org/10.1007/s00366-021-01478-5.
[26] A. Karamanli, and T. P. Vo, “Finite Element Model for Carbon Nanotube-reinforced and Graphene Nanoplatelet-reinforced Composite Beams”,
Composite Structures, Vol. 264, pp. 113739, 2021/02/14/ 2021,
https://doi.org/10.1016/j.compstruct.2021.113739.
[27] H. Mohammadi, M. Shojaee, and Y. Kiani, “A Simplified Isogeometric Approach for Vibrational Analysis of Nanocomposite Panels with a Free-form Curve”,
Thin-Walled Structures, Vol. 183, pp. 110426, 2022/11/26/ 2022,
https://doi.org/10.1016/j.tws.2022.110426.
[28] H. Mohammadi, “Isogeometric Thermal Buckling Analysis of GPL Reinforced Composite Laminated Folded Plates”,
Engineering Structures, Vol. 255, pp. 113905, 2022/01/13/ 2022,
https://doi.org/10.1016/j.engstruct.2022.113905.
[29] H. Mohammadi, “Isogeometric Approach for Thermal Buckling Analysis of FG Graphene Platelet Reinforced Composite Trapezoidally Corrugated Laminated Panels”,
Engineering Analysis with Boundary Elements, Vol. 151, pp. 244-254, 2023/03/08/ 2023,
https://doi.org/10.1016/j.enganabound.2023.03.007.
[30] H. Mohammadi, and M. Shojaee, “Application of Isogeometric Method for Shear Buckling Study of Graded Porous Nanocomposite Folded Plates”,
Archive of Applied Mechanics, 2023/12/30/ 2023,
https://doi.org/10.1007/s00419-023-02522-0.
[31] M. Babaei, F. Kiarasi, K. Asemi, R. Dimitri, and F. Tornabene, “Transient Thermal Stresses in FG Porous Rotating Truncated Cones Reinforced by Graphene Platelets”,
Applied Sciences, Vol. 12, pp. 3932, 2022/04/13/ 2022,
https://doi.org/10.3390/app12083932.
[32] M. Khatoonabadi, M. Jafari, F. Kiarasi, M. Hosseini, M. Babaei, and K. Asemi, “Shear Buckling Response of FG Porous Annular Sector Plate Reinforced by Graphene Platelet Subjected to Different Shear Loads”,
Journal of Computational Applied Mechanics, Vol. 54, pp. 68-86, 2023/03/1/ 2023,
https://doi.org/10.22059/jcamech.2023.352182.784.
[33] W. Fang, T. Yu, L. Van Lich, and T. Q. Bui, “Analysis of Thick Porous Beams By a Quasi-3D Theory and Isogeometric Analysis”,
Composite Structures, Vol. 221, pp. 110890, 2019/04/12/ 2019,
https://doi.org/10.1016/j.compstruct.2019.04.062.
[34] J. N. Reddy, “A Simple Higher-order Theory for Laminated Composite Plates”,
Journal of Applied Mechanics, Vol. 51, pp. 745-752, 1984/12/01/ 1984,
https://doi.org/10.1115/1.3167719.
[35] M. Touratier, “An Efficient Standard Plate Theory”, International Journal of Engineering Science, Vol. 29, pp. 901-916, 1990/10/15/ 1990,
https://doi.org/10.1016/0020-7225(91)90165-Y.
[36] K. P. Soldatos, “A Transverse Shear Deformation Theory for Homogeneous Monoclinic Plates”,
Acta Mechanica, Vol. 94, pp. 195–220, 1992/09/01/ 1992,
https://doi.org/10.1007/BF01176650.
[37] M. Karama, K. S. Afaq, and S. Mistou, “Mechanical Behaviour of Laminated Composite Beam by the New Multi-layered Laminated Composite Structures Model with Transverse Shear Stress Continuity”,
International Journal of Solids and Structures, Vol. 40, pp. 1525-1546, 2003/01/29/ 2003,
https://doi.org/10.1016/S0020-7683(02)00647-9.
[38] H. Mohammadi, and A. R. Setoodeh, “Free Vibration Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Skew Folded Plates using the Isogeometric Approach”,
Amirkabir Journal of Mechanical Engineering, Vol. 53, pp. 2239-2260, 2020/03/10/ 2020,
https://doi.org/10.22060/mej.2020.17298.6569.
[39] H. Mohammadi, “Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates Based on a Logarithmic Higher-order Shear Deformation Theory”,
Mechanics of Advanced Composite Structures, Vol. 8, pp. 435-453, 2021/11/18/ 2021,
https://doi.org/10.22075/macs.2021.23147.1334.
[40] H. Mohammadi, and A. R. Setoodeh, “FSDT-based Isogeometric Analysis for Free Vibration Behavior of Functionally Graded Skew Folded Plates”,
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 44, pp. 841–863, 2019/09/25/ 2019,
https://doi.org/10.1007/s40997-019-00320-0.
[41] H. Mohammadi, A. R. Setoodeh, and A. P. Vassilopoulos, “Isogeometric Kirchhoff–love Shell Patches in Free and Forced Vibration of Sinusoidally Corrugated FG Carbon Nanotube-reinforced Composite Panels”,
Thin-Walled Structures, Vol. 171, pp. 108707, 2021/11/19/ 2021,
https://doi.org/10.1016/j.tws.2021.108707.
[42] H. Matsunaga, “Vibration and Buckling of Deep Beam-columns on Two-parameter Elastic Foundations”,
Journal of Sound and Vibration, Vol. 228, pp. 359-376, 1999/05/26/ 1999,
https://doi.org/10.1006/jsvi.1999.2415.
[43] S. Goudarzi Hafshejani, and Y. Kiani, “Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets”, Iranian Journal of Mechanical Engineering Transactions of ISME, Vol. 25, pp. 128-167, 2023/04/11/ 2023, https://doi.org/10.30506/ijmep.2023.1972041.1902.
