[2] World Energy Consumption. Available:
[3] Sundarraj, P., Maity, D., Roy, S., and Taylor, R. A., “Recent Advances in Thermoelectric Materials and Solar Thermoelectric Generators–a Critical Review”, RSC Advances., Vol. 4, pp. 46860-46874, (2014).
[4] Zare, M., Ramin, H., and Hosseini, R., “Optimization of Segmented Thermoelectric Generator and Calculation of Performance”, Amirkabir Journal of Science and Research (Mechanical Engineering) Vol. 45, pp. 27-29, (2013).
[5] Cha´vez-Urbiola, E. A., Vorobiev, Yu. V., and Bulat, L.P., ”Solar Hybrid Systems with Thermoelectric Generators”, Solar Energy, Vol. 86, pp. 369–378, (2012).
[6] Miljkovic, N., and Wan, E. N., “Modeling and Optimization of Hybrid Solar Thermoelectric Systems with Thermosiphons”, Solar Energy, Vol. 85 pp. 2843–2855, (2011).
[7] Hassasnniadoon, M., AbbasNejad, A., and Moazemigoudarzi, A., “Experimental Investigation of Fresnel Lens Application in a Solar Water Heater with the Electricity Generation via Thermoelectric Module”, Journal of Solid and Fluid Mechanic, Vol. 4, pp. 159-169, (2014).
[8] Deng, Y., Zhu, W., Wang, Y., and Shi, Y., “Enhanced Performance of Solar-driven Photovoltaic Thermoelectric Hybrid System in an Integrated Design”, Solar Energy, Vol. 88 , pp. 182–191, (2013).
[9] Li, Y., Witharana, S., Cao, H., Lasfargues, M., Huang,Y., and Ding, Y., “Wide Spectrum Solar Energy Harvesting through an Integrated Photovoltaic and Thermoelectric System”, Particuology, Vol. 15, pp. 39–44, (2014).
[10] Lina, W., Shih, T., Zheng, J., Zhang, Y., and Chen, J., “Coupling of Temperatures and Power Outputs in Hybrid Photovoltaic and Thermoelectric Modules”, International Journal of Heat and Mass Transfer, Vol. 74, pp. 121–127, (2014).
[11] Zhang, J., Xuan, Y., and Yang, L., “Performance Estimation of Photovoltaic Thermoelectric Hybrid Systems”, International Journal of Energy, Vol. 78, No. 15, pp. 895-903, (2014).
[12] Panga, W., Liu, Y., Shao, S., and Gao, X., “Empirical Study on Thermal Performance through Separating Impacts from a Hybrid PV/TE System Design Integrating Heat Sink”, International Communications in Heat and Mass Transfer, Vol. 60, pp. 9-12, (2015).
[13] Wu, Y., Wu, S., and Xiao, L., “Performance Analysis of Photovoltaic–thermoelectric Hybrid System with and without Glass Cover”, International Journal of Energy Conversion and Management, Vol. 93, pp. 151–159, (2015).
[14] Najafi, H., and Woodbury, K. A., “Modeling and Analysis of a Combined Photovoltaic Thermoelectric Power Generation System”, Journal of Solar Energy Engineering, ASME, Vol. 135, No. 3, pp. 031013-031013-8, (2013).
[15] Fisac, M., Villasevil, F.X., and López, F., “High-efficiency Photovoltaic Technology Including Thermoelectric Generation”, Journal of Power Sources, Vol. 252, pp. 264-269, (2014).
[16] Najafi, H., and Woodbury, K.A., “Optimization of a Cooling System Based on Peltier Effect for Photovoltaic Cells”, Solar Energy, Vol. 91, pp. 152-160, (2013).
[17] Vishal, V., Aarti, K., and Singh, B., “Complementary Performance Enhancement of PV Energy System through Thermoelectric Generation”, Renewable and Sustainable Energy Reviews, Vol. 58, pp. 1017-1026, (2016).
[18] Farhangian Marandi, O., Ameri, M., and Adelshahian, B., “The Experimental Investigation of a Hybrid Photovoltaic Thermoelectric Power Generator Solar Cavity-Receiver”, Solar Energy, Vol. 161, pp. 38-46, (2018).
[19] Howell, J., Siegel, R., and Pinar, M., “Thermal Radiation Heat Transfer”, Fifth Ed, pp. 222- 248, New York, Taylor and Francis Inc., (2002).
[20] Modest, M. F., “Radiative Heat Transfer, Third Edition”, pp. 269-278, Elsevier, Science and Technology, London, (2013).
[21] Clausing, A. M., Waldvogel, J. M., and Lister, L. D., “Natural Convection from Isothermal Cubical Cavities with a Variety of Side Facing Apertures”, Heat Transfer, Vol. 109, pp. 407-412, (1987).
[22] Leibfried, U., and Ortjohann, J., “Convective Heat Loss from Upward and Downward-facing Cavity Solar Receivers: Measurements and Calculations”, J. Solar Energy Engineering., Vol. 117, pp. 75-84, (1995).
[23] Taumoefolau, T., Paitoonsurikarn, S., Hughes, G., and Lovegrove, K., “Experimental Investigation of Natural Convection Heat Loss from a Model Solar Concentrator Cavity Receiver”, Solar Energy Engineering, Vol. 126, pp. 801-807, (2004).
[24] Suter, C., “Thermoelectric Conversion of Concentrated Solar Radiation and Geothermal Energy”, Phd Thesis, ETH, Zurich, Switzerland, (2013).
[25] 801 Database Structure and Properties, Design Institute for Physical Property Research, American Institute of Chemical Engineers (AIChE), New York, USA, (2010).
[26] Sera, D., Teodorescu R., and Rodriguez, P., “PV Panel Model Based on Data Sheet Values”, Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE), Vigo, Spain, pp. 2392–2396, (2007).
[27] Meflah, A., Mahrane, A., Madjid, C., Khadidja, R., Hachemi, R., and Smara Z., “Current-Voltage Characteristic Modeling of a Silicon Micromorphous Photovoltaic Module”, IEEE Xplore, 3rd International Renewable and Sustainable Energy Conference (IRSEC'15), Marrakech & Ouarzazate, Morocco, pp. 1-6, (2015).
[28] Kryotherm Company Catalogue(Informational Booklet) Available:
[29] Steinfield, A., and Schubnell, M., “Optimum Aperture Size and Operating Temperature of a Solar Cavity-Receiver”, Solar Energy, Vol. 50, pp. 19-25, (1993).
[30] Mahmoodi, S., Berahmandpour, H., and Heydari, K., “Electricity Cost Evaluation by LCOE Algorithm in Different Energy Production Technology in IRAN”, 30th International Power Sytem Confrence, Tehran, Iran, 23-25 Nov, (2015).
[31] Branker, K., Pathak, M. J. M., and Pearce, J. M., “A Review of Solar Photovoltaic Levelized Cost of Electricity”, Renewable and Sustainable Energy Reviews, Vol. 15, pp. 4470– 4482, (2011).